DSPIC33FJ256GP510-I/PF Microchip Technology, DSPIC33FJ256GP510-I/PF Datasheet - Page 14

• Manufacturer Part Number: DSPIC33FJ256GP510-I/PF
• Description: IC DSPIC MCU/DSP 256K 100TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ256GP510-I/PF

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Core Frequency: 40MHz
• Core Supply Voltage: 3.3V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 85
• Flash Memory Size: 256KB
• Supply Voltage Range: 3V To 3.6V
• Package: 100TQFP
• Device Core: dsPIC
• Family Name: dSPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 85
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 32-chx10-bit|32-chx12-bit
• Number Of Timers: 9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1001 - DSPIC33 BREAKOUT BOARDDM300024 - KIT DEMO DSPICDEM 1.1DV164033 - KIT START EXPLORER 16 MPLAB ICD2MA330012 - MODULE DSPIC33 100P TO 84QFPMA330011 - MODULE DSPIC33 100P TO 100QFPDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32AC164323 - MODULE SKT FOR 100TQFP
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

26. Module: Interrupt Controller
DS80446D-page 14
If a clock failure occurs when the device is in Idle
mode, the oscillator failure trap does not vector to
the Trap Service Routine. Instead, the device will
simply wake-up from Idle mode and continue code
execution if the Fail-Safe Clock Monitor (FSCM) is
enabled.
Work around
Whenever the device wakes up from Idle
(assuming the FSCM is enabled) the user software
should check the state of the OSCFAIL bit
(INTCON1<1>) to determine whether a clock
failure occurred, and then perform the appropriate
clock switch operation. Regardless, the Trap
Service Routine must be included in the user
application.
Affected Silicon Revisions
A2
X
A3
X
A4
X
27. Module: Internal Voltage Regulator
28. Module: ECAN
If a MCLR Reset pulse causes the device to wake-
up from Sleep mode, the device wakes up without
waiting for the on-chip voltage regulator to power-
up. This will subsequently result in a Brown-out
Reset (BOR).
Work around
None.
Affected Silicon Revisions
The C1RXOVF2 and C2RXOVF2 registers are
non-functional. They are always read back as
0x0000, even when a receive overflow has
occurred.
Work around
None.
Affected Silicon Revisions
A2
A2
X
X
A3
A3
X
X
A4
A4
X
X
© 2010 Microchip Technology Inc.