AT91SAM7S32B-AU Atmel, AT91SAM7S32B-AU Datasheet - Page 299

• Manufacturer Part Number: AT91SAM7S32B-AU
• Description: IC MCU ARM7 32KB FLASH 48LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S32B-AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: I²C, SPI, SSC, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Cpu Family: 91S
• Device Core: ARM7TDMI
• Device Core Size: 32b
• Frequency (max): 55MHz
• Interface Type: SPI/TWI/USART
• Total Internal Ram Size: 8KB
• # I/os (max): 21
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.65/3V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 48
• Package Type: LQFP
• Package: 48LQFP
• Family Name: AT91
• Maximum Speed: 55 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

29.6.6
6175K–ATARM–30-Aug-10
Read/Write Flowcharts
The following flowcharts shown in
page
give examples for read and write operations. A polling or interrupt method can be used to check
the status bits. The interrupt method requires that the interrupt enable register (TWI_IER) be
configured first.
Figure 29-13. TWI Write Operation with Single Data Byte without Internal Address
301,
Figure 29-16 on page
(CLDIV, CHDIV, CKDIV) in TWI_CWGR
- Device slave address (DADR)
Set the Master Mode register:
302,
Write ==> bit MREAD = 0
TWI_THR = Data to send
Set the Control register:
Load Transmit register
AT91SAM7S Series Preliminary
- Transfer direction bit
Read Status register
Read Status register
Figure
(Needed only once)
TWI_CR = MSEN
Transfer finished
- Master enable
TXCOMP = 1?
Set TWI clock
Figure 29-17 on page 303
TXRDY = 1?
Yes
Yes
BEGIN
29-13,
Figure 29-14 on page
No
No
and
Figure 29-18 on page 304
300,
Figure 29-15 on
299