PIC24FJ64GA104-I/PT Microchip Technology, PIC24FJ64GA104-I/PT Datasheet - Page 15

• Manufacturer Part Number: PIC24FJ64GA104-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ64GA104-I/PT

• Core Size: 16-Bit
• Program Memory Size: 64KB (22K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC24
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, LIN, SPI, USART
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, LIN, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001, MA240020, DM240002, DM240011, DV164033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

2.1
 2010 Microchip Technology Inc.
INITIAL SETUP
Chapter 2. The XLP Demonstration Application
This chapter describes the demonstration application that is preprogrammed on the
PIC24F microcontroller, which shows the use of low-power techniques in a working
application. In the process, the application highlights various features of the PIC24F
microcontroller family.
Although intended as a development platform, the XLP 16-bit board is also designed
to be used directly from the box as a demonstration platform. The demonstration
firmware preprogrammed into the PIC24F16KA102 microcontroller is ready for
immediate use.
The demonstration firmware uses a USB-to-RS-232 converter to communicate with the
PC via a standard serial interface. In order to use the board with a PC, a serial terminal
program will be required. The open source program, RealTerm, is included with the
demo software and can be used to communicate to the board.
2.1.1
To get started with the board, verify that it is properly configured:
1. Verify the PIC24F16KA102 is correctly installed into socket, U1. The notch on the
2. Verify that S4 is in the “PIC24K” position.
3. Ensure the IC PWR switch is in the “RB2” position.
4. Populate the PIC PWR and IC PWR jumpers.
5. Select “EXT PS/USB” with the power source select jumper.
6. Select the “MCP9700” temperature sensor option with the temp sense jumper.
7. Populate the TEMP, SEE and POT jumpers.
2.1.2
Before connecting the board to the PC, install the driver by running the installation file
downloaded from the Microchip website. This setup utility will install the source and
documentation to the indicated location, and install the USB to RS-232 emulation drivers.
After the installation completes, connect the development board to the PC with the
provided USB cable (A to mini-B), as shown in Figure 2-1. The drivers will automatically
be located and installed by the operating system.
Note:
edge of the device package will be toward the top of the board.
Configuring and Connecting the Hardware
Installing the Software and Driver
For Windows XP, one or more dialogs may warn that the driver has not
been digitally signed. This is normal. Click OK to proceed through the
dialogs.
XLP 16-BIT DEVELOPMENT KIT
USER’S GUIDE
DS51873B-page 15