PIC18F27J53-I/SP Microchip Technology, PIC18F27J53-I/SP Datasheet - Page 221

• Manufacturer Part Number: PIC18F27J53-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: *
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Embedded Interface Type: I2C, SPI, USART
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

15.0
The Timer3/5 timer/counter modules incorporate these
features:
• Software selectable operation as a 16-bit timer or
• Readable and writable 8-bit registers (TMRxH
• Selectable clock source (internal or external) with
• Interrupt-on-overflow
• Module Reset on ECCP Special Event Trigger
 2010 Microchip Technology Inc.
counter
and TMRxL)
device clock or Timer1 oscillator internal options
Note: Throughout this section, generic references
TIMER3/5 MODULE
are used for register and bit names that are the
same – except for an ‘x’ variable that indicates
the item’s association with the Timer3 or
Timer5 module. For example, the control reg-
ister is named TxCON, and refers to T3CON
and T5CON.
Preliminary
PIC18F47J53 FAMILY
A simplified block diagram of the Timer3/5 module is
shown in Figure 15-1.
The Timer3/5 module is controlled through the TxCON
register (Register 15-1). It also selects the clock source
options for the ECCP modules. (For more information,
see Section 19.1.1 “ECCP Module and Timer
Resources”.)
The F
ECCP capture/compare features. If the timer will be
used with the capture or compare features, always
select one of the other timer clocking options.
OSC
clock source should not be used with the
DS39964B-page 221