PIC18F27J13-I/SP Microchip Technology, PIC18F27J13-I/SP Datasheet - Page 299

• Manufacturer Part Number: PIC18F27J13-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/SP

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Core: PIC
• Processor Series: PIC18F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 48 MHz
• Data Ram Size: 3.76 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 2
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• A/d Bit Size: 12 bit
• A/d Channels Available: 10
• Height: 3.43 mm
• Interface Type: I2C, SPI, USART
• Length: 34.4 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.15 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 17-1:
REGISTER 17-2:
 2010 Microchip Technology Inc.
bit 0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-4
bit 3-2
bit 1-0
TRIGSEL
R/W-0
2:
Available on PIC18(L)F4XK22 devices only.
Allow greater than 15 s acquisition time when measuring the Fixed Voltage Reference.
ADON: ADC Enable bit
1 = ADC is enabled
0 = ADC is disabled and consumes no operating current
TRIGSEL: Special Trigger Select bit
1 = Selects the special trigger from CTMU
0 = Selects the special trigger from CCP5
Unimplemented: Read as ‘0’
PVCFG<1:0>: Positive Voltage Reference Configuration bits
00 = A/D V
01 = A/D V
10 = A/D V
11 = Reserved (by default, A/D V
NVCFG0<1:0>: Negative Voltage Reference Configuration bits
00 = A/D V
01 = A/D V
10 = Reserved (by default, A/D V
11 = Reserved (by default, A/D V
U-0
—
ADCON0: A/D CONTROL REGISTER 0 (CONTINUED)
ADCON1: A/D CONTROL REGISTER 1
REF
REF
REF
REF
REF
W = Writable bit
‘1’ = Bit is set
+ connected to internal signal, AV
+ connected to external pin, V
+ connected to internal signal, FVR BUF2
- connected to internal signal, AV
- connected to external pin, V
U-0
—
REF
REF
REF
U-0
—
Preliminary
+ connected to internal signal, AV
+ connected to internal signal, AV
+ connected to internal signal, AV
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
REF
REF
R/W-0
-
SS
+
DD
PIC18(L)F2X/4XK22
PVCFG<1:0>
R/W-0
DD
SS
SS
x = Bit is unknown
)
)
)
R/W-0
NVCFG<1:0>
DS41412D-page 299
R/W-0
bit 0