PIC24HJ16GP304-I/ML Microchip Technology, PIC24HJ16GP304-I/ML Datasheet - Page 15

• Manufacturer Part Number: PIC24HJ16GP304-I/ML
• Description: IC PIC MCU FLASH 16K 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ16GP304-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 16KB (5.5K x 24)
• Package / Case: 44-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 35
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2.0
The PIC24HJ32GP202/204 and PIC24HJ16GP304
CPU modules have a 16-bit (data) modified Harvard
architecture with an enhanced instruction set and
addressing modes. The CPU has a 24-bit instruction
word with a variable length opcode field. The Program
Counter (PC) is 23 bits wide and addresses up to 4M x
24 bits of user program memory space. The actual
amount of program memory implemented varies by
device. A single-cycle instruction prefetch mechanism
is used to help maintain throughput and provides pre-
dictable execution. All instructions execute in a single
cycle, with the exception of instructions that change the
program flow, the double word move (MOV.D) instruc-
tion and the table instructions. Overhead-free, single-
cycle program loop constructs are supported using the
REPEAT instruction, which is interruptible at any point.
The PIC24HJ32GP202/204 and PIC24HJ16GP304
devices have sixteen, 16-bit working registers in the
programmer’s model. Each of the working registers can
serve as a data, address or address offset register. The
16th working register (W15) operates as a software
Stack Pointer (SP) for interrupts and calls.
The PIC24HJ32GP202/204 and PIC24HJ16GP304
instruction set includes many addressing modes and is
designed for optimum C compiler efficiency. For most
instructions,
PIC24HJ16GP304 is capable of executing a data (or
program data) memory read, a working register (data)
read, a data memory write and a program (instruction)
memory read per instruction cycle. As a result, three
parameter instructions can be supported, allowing
A + B = C operations to be executed in a single cycle.
A block diagram of the CPU is shown in Figure 2-1, and
the programmer’s model for the PIC24HJ32GP202/
204 and PIC24HJ16GP304 is shown in Figure 2-2.
© 2007 Microchip Technology Inc.
Note:
CPU
This data sheet summarizes the features
of this group of PIC24HJ32GP202/204
and PIC24HJ16GP304 devices. It is not
intended to be a comprehensive reference
source. To complement the information in
this data sheet, refer to the “PIC24H
Family Reference Manual”.
PIC24HJ32GP202/204 and PIC24HJ16GP304
the
PIC24HJ32GP202/204
and
Preliminary
2.1
The data space can be linearly addressed as 32K words
or 64 Kbytes using an Address Generation Unit (AGU).
The upper 32 Kbytes of the data space memory map can
optionally be mapped into program space at any 16K
program word boundary defined by the 8-bit Program
Space Visibility Page (PSVPAG) register. The program
to data space mapping feature lets any instruction
access program space as if it were data space.
The data space also includes 2 Kbytes of DMA RAM,
which is primarily used for DMA data transfers, but this
may be used as general purpose RAM.
2.2
The PIC24HJ32GP202/204 and PIC24HJ16GP304
feature a 17-bit by 17-bit, single-cycle multiplier. The
multiplier can perform signed, unsigned and mixed-
sign multiplication. Using a 17-bit by 17-bit multiplier for
16-bit by 16-bit multiplication makes mixed-sign
multiplication possible.
The PIC24HJ32GP202/204 and PIC24HJ16GP304
supports 16/16 and 32/16 integer divide operations. All
divide instructions are iterative operations. They must
be executed within a REPEAT loop, resulting in a total
execution time of 19 instruction cycles. The divide
operation can be interrupted during any of those
19 cycles without loss of data.
A multi-bit data shifter is used to perform up to a 16-bit,
left or right shift in a single cycle.
Data Addressing Overview
Special MCU Features
DS70289A-page 13