CHIPPROG-40 Phyton Inc, CHIPPROG-40 Datasheet - Page 84

• Manufacturer Part Number: CHIPPROG-40
• Description: PROGRAMMER STANDALONE 40-DIP
• Manufacturer: Phyton Inc
• Type: Universal, Stand Aloner

Specifications of CHIPPROG-40

• Contents: Programmer, Cables, CD, Power Adapter
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• Features: Embedded Script Language For Automation Of Routine Operations, Splits Files To Multiple Images
• Rohs Compliant: Yes
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.3
5.3.1
5.3.2
5.3.3
84
Basic programming functions
How to check if a device is blank
How to erase a device
How to program a device
1. Select the target device type, pressed the button Select Device in the Main toolbar or select the
2.
3. a) Click the Check button on the main toolbar or
1.
2. If the device is electrically erasable:
In order to program a blank device you need to perform a few consecutive operations:
Sub-topics of this chapter describe all the basic ChipProg-40 and -48 operations in a single programming
mode, when a device is programming in the programmer socket. Specific operations for programming more
than one device at one time are described in the Multi- and Gang programming
ChipProg Device Programmers
load the file
write
(if necessary);
the device to be programmed (if necessary);
command Main menu > Configure > Select device.
window or
Blank check function line in the Function list of the
Execute button or
Main menu > Commands and click on the Blank check line
then wait for the message Checking … OK in the
message if the device is not blank
or
the Execute button or
then wait for the message Erasing … OK in the
message if the device is not blank after erasing.
Insert a device
b) Double click on the Blank check function line in the Function list of the
Make sure the device is electrically erasable. Some devices are not erasable; these may be
programmable once, UV erasable, or over-writable – in this case the Erase button is blocked (grey
out).
a) Click the Erase button on the main toolbar or
b) Double click on the Erase function line in the Function list of the
c) Select the Erase function line in the Function list of the
d) Select the Main menu > Commands and click on the Erase line
the prepared information into the device and verify the programming.
of the selected type into the programmer socket or into the adapter socket.
Program Manager
Program Manager
© 2010 Phyton, Inc. Microsystems and Development Tools
Program Manager
Program Manager
Program Manager
window or for the warning
window, or for the warning
window and click the
Program Manager
window and click
window