CHIPPROG-40 Phyton Inc, CHIPPROG-40 Datasheet - Page 34

• Manufacturer Part Number: CHIPPROG-40
• Description: PROGRAMMER STANDALONE 40-DIP
• Manufacturer: Phyton Inc
• Type: Universal, Stand Aloner

Specifications of CHIPPROG-40

• Contents: Programmer, Cables, CD, Power Adapter
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• Features: Embedded Script Language For Automation Of Routine Operations, Splits Files To Multiple Images
• Rohs Compliant: Yes
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.3.3
34
ChipProg-G4
For the programmers to be used in a multi-programming mode, e.g. connected to one
computer:
Read about the
ChipProg Device Programmers
Powering the
programmer
Connecting to a PC
Starting up
Powering the
programmers
Connecting the
programmers to a
cluster
Starting up
Powering the
programmer
Multi-Programming
Plug the
power adapter to the coaxial connector on the rear panel of the
programmer and make sure that the "Good" green LED on the
programmer is on.
Connect a USB port of your PC to a USB connector on the rear panel of
the programmer by means of the
connect the programmer to a USB slot on the computer main unit and not
connect it through a USB hub, especially through a passive hub.
Start the Phyton ChipProgUSB program; if the programmer passes the
startup test successfully the first dialog prompts you to choose one of the
programmers to work with: ChipProg-48, ChipProg-40 or ChipProg-ISP.
Select the ChipProg-40 and continue. The ChipProgUSB main window
will open and you will be able to work with the tool.
Plug the
programming cluster to the 110/240V outlets. Connect plugs of the power
adapter to the coaxial connectors on the rear panels of all the
programmers and make sure that the "Good"LEDs on each of them are
on.
Connect USB ports of your PCs to USB connectors on the rear panels of
the programmers by means of the
to connect the programmers to USB slots on the computer main unit and
not connect them through a USB hub, especially through a passive hub.
Start the Phyton ChipProgUSB - Gang Mode program; if all the
programmers pass the startup test successfully the first dialog prompts
you to assign the number from one to N to each programmer included in
the cluster. To assign the number push a Start button on a top panel of
each programmer one by one. Then the main window will open and you
will be able to work with the tool.
Plug the power cord to a power connector on the rear panel of the
programmer, then plug an opposite site to the ~110/240V outlet. Make
sure that all four "Good" green LEDs on the programmer are on.
power adapter
power adapters
mode.
to the ~110/240V outlet. Connect a plug of the
of each programmer to be connected in one
© 2010 Phyton, Inc. Microsystems and Development Tools
USB
USB
cable. It's highly recommended to
cables. It's highly recommended