CHIPPROG-40 Phyton Inc, CHIPPROG-40 Datasheet - Page 17

• Manufacturer Part Number: CHIPPROG-40
• Description: PROGRAMMER STANDALONE 40-DIP
• Manufacturer: Phyton Inc
• Type: Universal, Stand Aloner

Specifications of CHIPPROG-40

• Contents: Programmer, Cables, CD, Power Adapter
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• Features: Embedded Script Language For Automation Of Routine Operations, Splits Files To Multiple Images
• Rohs Compliant: Yes
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

© 2010 Phyton, Inc. Microsystems and Development Tools
2.2.2
2.2.3
4. Can program target devices in the programmer ZIF socket as well as the devices installed in the
5. ChipProg-48 tools can be driven from multiple USB ports of one computer (or via a USB hub) to
6. Has a button for fast manual launch of any single operation or a bunch of operations.
7. Has three LEDs for displaying the programming status (“Good”, “Busy”, “Error”).
Hardware characteristics
1. The programmer has a 48-pin ZIF socket with a lever that enables the insertion and clamping of any
2. Adapters for programming devices in the SDIP, PLCC, SOIC, SOP, PSOP, TSOP, TSOPII, TSSOP,
3. The programmer is built on the base of a very fast and productive 32-bit embedded microcontroller and
4. Most timing-critical parts of the programming algorithms are implemented on the FPGA devices and
5. Implementation in the FPGA devices logical drivers enables outputting logical signals of any level (low,
6. The tool hardware features 10-bit digital-to-analog converters for accurate settings of the analog
7. The tool hardware enables accurate programming of the rising and falling edges of the generated
8. The tool hardware automatically adjusts the generated analog signals.
9. The generated analog signals for both the target supplying and programming can be outputted to any
10. The tool hardware can connect any pin of the device being programmed to the “Ground” level.
11. The tool hardware checks if every pin of the target device is reliably fixed by a ZIF socket’s contacts
12. The tool hardware protects itself and the target device against incorrect insertions and other issues
13. The target device pins are protected against the electrostatic discharge.
14. The tool’s hardware has a programmable clock generator.
15.
Software features
1. Works under control of Windows 95/98/ME/2000/XP/Vista.
2. Friendly, intuitive graphic user interface.
3. Includes a set of basic commands: Blank Check, Erase, Read, Write, Verify, Lock, Set Configuration
4. Enables programming a batch of the commands above executed one after one either by a manual
5. Allows serialization of the programming devices with auto incrementing the device numbers and
6. The program can calculate checksums of the selected data array and then write the checksum into a
equipment (ISP mode).
provide concurrent programming of multiple devices of the same type.
DIP-packed devices with the package width from 300 to 600 mil (7.62 to 15.24 mm) and with the
number of leads up to 48.
QFP, TQFP, VQFP, QFN, SON, BGA, CSP and other packages are available from Phyton and many
third parties.
FPGA. These resources allow adding new targets to the device list by a simple software update.
do not involve any operations on the embedded microcontroller that would slow down the programming
speed.
high, Pullup, Pulldown and external clock generator) to any pin of the programming ZIF socket.
signals.
analog signals.
pins of the device being programmed.
(“bad contact” checking).
that cause a sharp increase in the currents though the target device circuits. This “over current”
protection is very fast and reliable.
Bits, Data Memory Support, etc., executed by a single mouse click or via menu.
start or by a mouse click or automatically upon the device insertion into the programming socket.
storing a serialization log.
specified memory location of the target device. Several methods of the checksum calculation can be
ChipProg Family Brief Description
17