DK-START-4CGX15N Altera, DK-START-4CGX15N Datasheet - Page 37

• Manufacturer Part Number: DK-START-4CGX15N
• Description: KIT STARTER CYCLONE IV GX
• Manufacturer: Altera
• Series: Cyclone® IVr
• Type: FPGAr

Specifications of DK-START-4CGX15N

• Contents: Board, Cables, Power Supply
• Silicon Manufacturer: Altera
• Core Architecture: FPGA
• Core Sub-architecture: Cyclone
• Silicon Core Number: EP4C
• Silicon Family Name: Cyclone IV GX
• Kit Contents: Board, Cables, PSU, CD
• Rohs Compliant: Yes
• For Use With/related Products: Cyclone IV GX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-2569

Chapter 6: Board Test System
Configuring the FPGA Using the Quartus II Programmer
Configuring the FPGA Using the Quartus II Programmer
© March 2010 Altera Corporation
1
You can use the Quartus II Programmer to configure the FPGA with a specific .sof.
Before configuring the FPGA, ensure that the Quartus II Programmer and the
USB-Blaster driver are installed on the host computer, the USB cable is connected to
the transceiver starter board, power to the board is on, and no other applications that
use the JTAG chain are running.
To configure the Cyclone IV GX FPGA, perform the following steps:
1. Start the Quartus II Programmer.
2. Click Add File and select the path to the desired .sof.
3. Turn on the Program/Configure option for the added file.
4. Click Start to download the selected file to the FPGA. Configuration is complete
Using the Quartus II programmer to configure a device on the board causes other
JTAG-based applications such as the Board Test System and the Power Monitor to
loose their connection to the board. Restart those applications after configuration is
complete.
when the progress bar reaches 100%.
Cyclone IV GX Transceiver Starter Kit User Guide
6–19