MAX9218EVKIT+ Maxim Integrated Products, MAX9218EVKIT+ Datasheet - Page 7

• Manufacturer Part Number: MAX9218EVKIT+
• Description: KIT PCB EVALUATION FOR MAX9218
• Manufacturer: Maxim Integrated Products

Specifications of MAX9218EVKIT+

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

To activate this feature, the MAX9217 must first enter
power-down mode by driving H6-15 low. Place a shunt
in the 2-3 position of JU7 and JU8. Activate the internal
PRBS mode by applying a negative DC voltage (-1.0V to
-3.0V) to the VNEG pad.
To monitor the SerDes signal integrity, connect one
channel of the digital oscilloscope with differential probe
capabilities to OUT+ and OUT- signal lines from jumpers
JU12 and JU13 (MAX9217). Repeat the same test for
the deserializer (MAX9218) on signal lines IN+ and IN-,
accessible through jumpers JU9 and JU10.
________________________________________________________________________________________ _ 7
MAX9217/MAX9218 Evaluation Kit
The MAX9217 is powered by connecting PVCC1, LVCC1,
IVCC, and DVCC1 to a DC power supply at 3.0V to 3.6V.
The MAX9217 can be configured to reduce wiring to the
supply and ground pads by placing shunts on jumpers
JU19, JU20, and JU21. The MAX9218 is powered by
applying 3.0V to 3.6V to the PVCC2, LVCC2, OVCC,
and DVCC2 pads. The MAX9218 can be configured to
reduce wiring to the supply and ground pads by placing
shunts on jumpers JU16, JU17, and JU18.
Power Supplies