SE014S110 Lineage Power, SE014S110 Datasheet - Page 8

• Manufacturer Part Number: SE014S110
• Description: CONVERTER DC/DC E254110V 14W OUT
• Manufacturer: Lineage Power
• Series: SEr
• Type: Isolated with Remote On/Offr

Specifications of SE014S110

• Output: 110V
• Number Of Outputs: 1
• Power (watts): 14W
• Mounting Type: Through Hole
• Voltage - Input: 40 ~ 60V
• Package / Case: 6-DIP Module
• 1st Output: 110 VDC @ 130mA
• Size / Dimension: 2.00" L x 2.00" W x 0.50" H (50.8mm x 50.8mm x 12.7mm)
• Power (watts) - Rated: 14W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 82%
• Approvals: CSA, UL
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: No

SE014S110 Power Module; dc-dc Converter:
48 Vdc Input, 110 Vdc Output, 14 W
Thermal Considerations
Many conditions affect the thermal performance of the
power module, such as orientation, airflow over the
module, and board spacing. To avoid exceeding the
maximum temperature rating of the components inside
the power module, the case temperature must be kept
below 105 °C. Measure the case temperature at the
location shown in Figure 9.
A sample application is shown in Figure 10 with 36 mm
(1.4 in.) center-to-center board spacing and a vertical
module orientation. Figure 11 shows the temperature
derating curves under these conditions.
Note: At output voltages less than 110 V, the maximum
Note: Top view, pin locations are for reference only. Measurements
Figure 9. Thermocouple Position for Measuring
8
Lucent
ON/OFF + IN –
+
SE014S110
DC–DC Power Module
IN:DC 48V, 0.36A OUT:DC 110V, 0.13A
shown in millimeters and (inches).
output current is 130 mA. At output voltages
greater than 110 V, the maximum output power is
14 W.
OUT
ADJ
Case Temperature
MADE IN USA
–
TUV Rheinland
(1.0)
THERMOCOUPLE
POSITION
(CASE TEMPERATURE)
10 (0.4)
25
8-657(C)
* Center the velocity probe and thermocouple in the channel formed
Note: Measurements shown in millimeters and (inches).
Figure 10. Power Module Orientation in Test
between the top of the module and the adjacent PWB.
VELOCITY PROBE*
POSITION OF AIR
15
12
9
6
3
0
–40
Figure 11. Thermal Derating Curves
Chamber
–20
AMBIENT TEMPERATURE, T
CENTER-TO-
0.75 ms
CENTER
0
36 (1.4)
0.25 ms
(2.00)
FLOW
50.8
AIR-
–1
20
(150 ft./min.)
CONVECTION
–1
THERMOCOUPLE FOR
AMBIENT TEMPERATURE
MEASUREMENT*
(50 ft./min.)
NATURAL
Tyco Electronics Corp.
40
January 2000
60
Data Sheet
A
( C)
80
8-656(C)
8-655(C)
100