XBP24-BPIT-004 Digi International, XBP24-BPIT-004 Datasheet - Page 66

• Manufacturer Part Number: XBP24-BPIT-004
• Description: Zigbee / 802.15.4 Modules XBee-PRO Znet 2.5 PCB Antenna
• Manufacturer: Digi International

Specifications of XBP24-BPIT-004

• Rohs: yes
• Frequency Band: 2.4 GHz
• Line Of Sight Range: 100 m
• Data Rate: 250 Kbps
• Sensitivity: - 102 dBm
• Operating Supply Voltage: 3 V to 3.4 V
• Output Power: 63 mW
• Antenna Connector Type: PCB
• Maximum Operating Temperature: + 85 C

XBee ZNet 2.5/XBee‐PRO ZNet 2.5 ZigBee OEM RF Modules v1.x4x
Identifies UART data frame
being reported.
Frame ID (Byte 5)
Start Delimiter
0x7E
MSB (most significant byte) first,
LSB (least significant) last
64-bit Address
(Bytes 5-12)
MSB
ZigBee Transmit Status
ZigBee Receive Packet
Length
API Identifier Value: 0x8B
When a TX Request is completed, the module sends a TX Status message. This message will
indicate if the packet was transmitted successfully or if there was a failure.
Figure 6‐15. TX Status Frames
API Identifier Value: (0x90)
When the module receives an RF packet, it is sent out the UART using this message type.
Figure 6‐16. RX Packet Frames
Remote Network Address (Bytes 6-7)
© 2008 Digi International, Inc.
Start Delimiter
16-bit Network Address the
packet was delivered to (if
success). If not success, this
address matches the
Destination Network Address
that was provided in the
Transmit Request Frame.
LSB
0x7E
API Identifier
0x8B
API-specific Structure
Frame Data
MSB
MSB (most significant byte) first,
LSB (least significant) last
Identifier-specific Data
Length
cmdData
LSB
API Identifier
16-bit Network Address
0x90
(Bytes 13-14)
API-specific Structure
Transmit Retry Count (Byte 8)
Checksum
The number of application
transmission retries that
took place.
1 Byte
Frame Data
Identifier-specific Data
cmdData
0x01 - Packet Acknowledged
0x02 - Packet was a
broadcast packet
Checksum
1 Byte
0x00 = Success
0x02 = CCA Failure
0x15 = Invalid destination
endpoint
0x21 = Network ACK Failure
0x22 = Not Joined to Network
0x23 = Self-addressed
0x24 = Address Not Found
0x25 = Route Not Found
(Byte 15)
Options
Delivery Status (Byte 9)
Up to 72 Bytes per packet
(Byte(s) 16-n)
0x00 = No Discovery
0x01 = Address Discovery
0x02 = Route Discovery
0x03 = Address and Route
RF Data
Discovery Status (Byte 10)
Overhead
Discovery
65