SCC1300-D02DEMO Murata Electronics, SCC1300-D02DEMO Datasheet - Page 16

• Manufacturer Part Number: SCC1300-D02DEMO
• Description: Acceleration Sensor Development Tools SCC1300-D02 Demo Board
• Manufacturer: Murata Electronics

Specifications of SCC1300-D02DEMO

• Tool Is For Evaluation Of: SCA1300-D02
• Acceleration: 2 g
• Sensing Axis: Triple Axis
• Interface Type: SPI
• Operating Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Operating Current: 24 mA
• Output Type: Analog and Digital

8.1
VTI Technologies Oy
www.vti.fi
Checking and Setting Correct USB Driver Latency Timer Value
The FTDI USB Virtual Serial Com Port driver is delivered with the SCC1300 demo kit and the same
driver version can be also downloaded from VTI's website.
In order to modify the driver's Latency timer value, please plug the demo USB cable in to PC and
follow the steps (and screen captures) below:
Start → Control panel
1. Open control panel and select “SYSTEM”
2. Select “DEVICE MANAGER” from “HARDWARE” tab
3. Select “USB SERIAL PORT” from the list, right mouse click and select
“PROPERTIES"
4. Select “ADVANVED” from the USB Serial port Properties
5. Set the “LATENCY TIMER” to 5 ms (the 16ms default value is too slow for SCC1300
Demo Kit).
6. Press “OK” to all windows.
7. Restart the GUI software.
1.
Doc.Nr. 82117600.01
2.
SCC1300 GYRO-COMBO DEMO KIT
User Manual
Rev.0.1
16/19