SCC1300-D02DEMO Murata Electronics, SCC1300-D02DEMO Datasheet - Page 15

• Manufacturer Part Number: SCC1300-D02DEMO
• Description: Acceleration Sensor Development Tools SCC1300-D02 Demo Board
• Manufacturer: Murata Electronics

Specifications of SCC1300-D02DEMO

• Tool Is For Evaluation Of: SCA1300-D02
• Acceleration: 2 g
• Sensing Axis: Triple Axis
• Interface Type: SPI
• Operating Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Operating Current: 24 mA
• Output Type: Analog and Digital

8
VTI Technologies Oy
www.vti.fi
Troubleshooting
Due to many PC environments, the interoperability can be limited. The SCC1300 Demo Kit has
been tested with DELL laptops (Latitude D600, D610, D620, D410) and desktop PCs with Win2000
WinXP, Vista and Windows 7 operating systems. If the SCC1300 Demo Kit does not work properly
or its operation is limited, the following items may help to sort the problems out:
1. Stop the GUI software, press the reset button program on demo USB interface board (see
2. SCC1300 demo may not work properly if your PC has multiple USB serial port devices
3. Close Windows HyperTerminal software, if you have used it.
4. If the GUI interface starts, but data is not scrolling in the window, check that USB driver
5. Some times other LabView based software do not allow the demo kit GUI software
6. If the PC is unable to find the demo kit serial port, try another USB port. Also, please check
7. Test the demo with another USB cable.
8. Check that the communication between the demo kit and the PC works:
Figure 1), re-start the GUI again.
installed. Please remove all other USB serial port devices (including other VTI demos).
LATENCY TIMER parameter is 5ms, please see details in section 8.1
execution, please try to install the SCC1300 demo kit to another PC or remove other
LabView based software
that there are not duplicate serial COM port numbers, more details in section 8.2.
→ if the info text is transmitted, the communication between the demo kit and PC is ok
•
•
•
Open HyperTerminal connection to the demo (see section 5)
Press demo reset button (see Figure 1)
see if the info text appears on the screen (see Figure 9)
Doc.Nr. 82117600.01
SCC1300 GYRO-COMBO DEMO KIT
User Manual
Rev.0.1
15/19