f75373 Feature Integration Technology Inc., f75373 Datasheet - Page 19

• Manufacturer Part Number: f75373
• Description: Fintek Hardware Monitor Ic Datasheet
• Manufacturer: Feature Integration Technology Inc.

6.2
6.3
Power on default <7:0> = 00h
Power on default <7:0> = 00h
Configuration Register  Index 01h
Configuration Register  Index 02h
7-2
1
0
7-6
5
4
3
2
1
Bit
Bit
Fintek
F_FAULT_MOD
E
Reserved
PIN4_MODE
PIN2_MODE
PIN5_MODE
SMI_MODE
SMI_LEVEL
Reserved
LED_FREQ
Name
Name
Attribute
Attribute
RO
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Read back will be 0
Pin 4 mode select, set this bit to 1 will enable PWMOUT2 output, else
if set this bit to 0, pin 4 will be enable the GPIO1 function.(default)
This mode is trappable: When PIN3 trapped to high at power-on,
PIN4 is set to PWMOUT2. When PIN3 trapped to low at power-on,
PIN4 is set to GPIO1.
Pin 2 mode select, set this bit to 1 will enable FANIN2 input, if set this
bit to 0 pin 2 will be enable the GPIO0 function.(default).
This mode is trappable: When PIN3 trapped to high at power-on,
PIN2 is set to FANIN2. When PIN3 trapped to low at power-on, PIN2
is set to GPIO0.
00: pin5 function is GPIO2
01: pin5 is used as SMI
10: pin5 is used as Fan fault function
11: LED out(1Hz/0.5Hz select by bit2)
If set to 0, SMI will be level mode else if this bit set to 1, SMI will be
pulse mode.
When set this bit to 0 SMI is low active (default). if set to 1 SMI is high
active
Reserved register
When set this bit to 1 fan fault LED output frequency will be 0.5HZ,
else is 1Hz(default)
When set this bit to 0 the fan fault will be level mod, else if set to 1 the fan
fault will indicate by LED function(1Hz or 0.5Hz) the LED frequency can
set by REG02H bit2
14
Feature Integration Technology Inc.
Description
Description
F75373
V0.25P