am41pds3228d Meet Spansion Inc., am41pds3228d Datasheet - Page 27

• Manufacturer Part Number: am41pds3228d
• Description: 32 Mbit 2 M ? 16-bit Cmos 1.8 Volt-only, Simultaneous Operation Page Mode Flash Memory And 8 Mbit 1 M ? 8-bit/512 K ? 16-bit Static Ram Preliminary
• Manufacturer: Meet Spansion Inc.

erase-suspended. Refer to the Flash Write Operation
Status section for information on these status bits.
After an erase-suspended program operation is com-
plete, the device returns to the erase-suspend-read
mode. The system can determine the status of the
program operation using the DQ7 or DQ6 status bits,
just as in the standard word program operation.
Refer to the Flash Write Operation Status section for
more information.
In the erase-suspend-read mode, the system can also
issue the autoselect command sequence. Refer to the
Autoselect Mode and Autoselect Command Sequence
sections for details.
To resume the sector erase operation, the system
must write the Erase Resume command. The address
of the erase-suspended sector is required when writ-
ing this command. Further writes of the Resume com-
mand are ignored. Another Erase Suspend command
can be written after the chip has resumed erasing.
26
P R E L I M I N A R Y
Am41PDS3228D
Notes:
1. See Table 10 for erase command sequence.
2. See the section on DQ3 for information on the sector
erase timer.
No
Command Sequence
Figure 5. Erase Operation
Data Poll to Erasing
Erasure Completed
Bank from System
Write Erase
Data = FFh?
(Notes 1, 2)
START
Yes
Embedded
Erase
algorithm
in progress
May 13, 2002