mpc5566 Freescale Semiconductor, Inc, mpc5566 Datasheet - Page 63

• Manufacturer Part Number: mpc5566
• Description: Mpc5566 High Performance Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

5.2
The following table lists the information that changed in the tables between Rev. 1.0 and 2.0. Click the
links to see the change.
Freescale Semiconductor
Location
Table
Location
Table
Table
Table
Figure
Table
27, EQADC SSI Timing Characteristics:
3, MPC5566 Thermal Characteristics:
6, VCR/POR Electrical Specifications:
9, DC Electrical Specifications:
16, Flash BIU Settings vs. Frequency of Operation:
32, MPC5566 416 Package: Deleted the version number and date.
Information Changed Between Revisions 1.0 and 2.0
Changed for production purposes, footnote 1 from:
Junction temperature is a function of on-chip power dissipation, package thermal resistance, mounting site (board)
temperature, ambient temperature, air flow, power dissipation of other components on the board, and board thermal
resistance.
to:
Junction temperature is a function of on-chip power dissipation, package thermal resistance, mounting site (board)
temperature, ambient temperature, air flow, power dissipation of other board components, and board thermal
resistance.
Added footnote 1 to specs 1, 2, and 3 that reads: On power up, assert RESET before V
negate (internal POR). RESET must remain asserted until the power supplies are within the operating conditions
as specified in
outside the operating conditions and until the internal POR asserts.
• Deleted from table title ‘(Pads at 3.3 V or 5.0 V)’
• Deleted 1st line in table ‘CLOAD = 25 pF on all outputs. Pad drive strength set to maximum.’
• Spec 1: FCK frequency -- removed.
• Combined footnotes 1 and 2, and moved the new footnote to Spec 2. Moved old footnote 3 that is now
• Footnote 1, deleted ‘V
• Footnote 2: added ‘cycle’ after ‘duty’ to read: FCK duty cycle is not 50% when . . . .
• Added footnote that reads: V
• Removed footnote to specs 27a, b, and c on the max values that read: “Preliminary. Specification pending final
• Removed footnote to specs 27a, b, and c on the max values that read: “Specification pending final
• Removed footnote 9 in columns APC and RWSC for 147 MHz row that read: Preliminary setting. Final setting
footnote 2 to Spec 2.
Changed ‘CL = 50 pF’ to ‘CL = 25 pF.’
a range of 1.6–3.6 V if EBTS =1.
characterization.”
characterization.”
pending characterization.
Table 33. Table and Figure Changes Between Rev. 0.0 and Rev. 1.0 (continued)
Table 9
Table 34. Table Changes Between Rev. 1.0 and 2.0
DC Electrical Specifications. On power down, assert RESET before any power supplies fall
DD
MPC5566 Microcontroller Data Sheet, Rev. 2.0
= 1.35–1.65 V’ and ‘V
DDE2
and V
DDE3
Description of Changes
Description of Changes
are limited to 2.25–3.6 V only if EBTS = 0; V
DD33
and V
DDSYN
Revision History for the MPC5566 Data Sheet
= 3.0–3.6 V.’
POR15
DDE2
, V
POR33
and V
, and V
DDE3
POR5
have
63