cef830g Hope Microelectronics co., Ltd, cef830g Datasheet - Page 31

• Manufacturer Part Number: cef830g
• Description: Rf42/43 Ism Transmitter
• Manufacturer: Hope Microelectronics co., Ltd

R F 4 2 / 4 3
6. Data Handling and Packet Handler
6.1. TX FIFO
A 64 byte FIFO is integrated into the chip for TX, as shown in Figure 10. "Register 7Fh. FIFO Access" is used to
access the FIFO. A burst write, as described in "3.1. Serial Peripheral Interface (SPI)", to address 7Fh will write
data to the TX FIFO.
Figure 10. FIFO Threshold
The TX FIFO has two programmable thresholds. An interrupt event occurs when the data in the TX FIFO reaches
these thresholds. The first threshold is the FIFO Almost Full threshold, txafthr[5:0]. The value in this register
corresponds to the desired threshold value in number of bytes. When the data being filled into the TX FIFO reaches
this threshold limit, an interrupt to the microcontroller is generated so the chip can enter TX mode to transmit the
contents of the TX FIFO. The second threshold for TX is the FIFO Almost Empty Threshold, txaethr[5:0]. When the
data being shifted out of the TX FIFO reaches the Almost Empty threshold an interrupt will be generated. The
microcontroller will need to switch out of TX mode or fill more data into the TX FIFO. The Transmitter may be
configured so that when the TX FIFO is empty the chip will automatically move to the Ready state. In this mode the TX
FIFO Almost Empty Threshold may not be useful. This functionality is set by the ffidle bit in ―Register 08h. Operating
Mode and Function Control
2,‖.
31
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
http://www.hoperf.com