JL82575EB S LAAK Intel, JL82575EB S LAAK Datasheet - Page 3

• Manufacturer Part Number: JL82575EB S LAAK
• Manufacturer: Intel

Specifications of JL82575EB S LAAK

• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Lead Free Status / Rohs Status: Compliant

Host Offloading Features (continued)
Tx/Rx IP, TCP, and UDP checksum offloading (IPv4, IPv6) capabilities
Tx TCP segmentation offloading (IPv4, IPv6)
IPv6 offloading
Receive Side Scaling for Windows environment and Scalable I/O for
Linux* environments (IPv4, IPv6, TCP/UDP)
Advanced packet filtering
IEEE 802. 1 q virtual local area network (VLAN) support with VLAN tag
insertion, stripping and packet filtering for up to 4096 VLAN tags
Double VLAN
Features
Manageability Features
On-board microcontroller
DMTF NC-SI pass through
SMBus pass through
Advanced filtering capabilities (IPv4, IPv6)
Alerting Standards Format 2.0
Preboot eXecution Environment (PXE) flash interface support
Simple Network Management Protocol (SNMP) and Remote Network
Monitoring (RMON) statistic counters
SDG 3.0, Wired for Management (WfM) 3.0 and PC2001 compliant
Wake on LAN support
iSCSI boot
MDIO – internal management interface
Watchdog timer
Additional Device Features
Dual Integrated SerDes
SFP (SGMII and 2-wire) interface
Fiber/copper auto switch
Four outputs on each port that directly drive LEDs
Internal phase-locked loop (PLL) for clock generation can use a
25 MHz crystal
JTAG (IEEE 1149. 1 *) silicon test access port built-in
No heat sink
Benefits
• Lower processor utilization
• Checksum and segmentation capability extended to new standard packet type
• Increased throughput and lower processor utilization
• Compatible with large send offload feature (in Microsoft Windows* XP)
• Checksum and segmentation capability extended to new standard packet type
• Multiple Rx queues
• 16 exact-matched packets (unicast or multicast)
• 4096-bit hash filter for multicast frames
• Lower processor utilization
• Promiscuous (unicast and multicast) transfer mode support
• Optional filtering of invalid frames
• Ability to create multiple VLAN segments
• Enables a mode where all received and sent packets have at least one VLAN tag in addition to
• Implements pass-through manageability via a sideband interface to a Board Management
• Implements ASF 2.0 for low cost, standalone management solution
• Industry standard for BMC interface
• Allows fast data rates (up to 100 Mb/s full duplex)
• Better capabilities (video redirection)
• Extended filtering capabilities
• Supports pass through over the SMBus interface
• Data rates of up to 400 KHz
• Allows serial redirection and IPMI traffic redirection to BMC
• Supports extended L2, L3 and L4 filtering for traffic routing to BMC
• Supports MAC address, VLAN, ARP, IPv4, IPv6, RMCP UDP ports, UDP/TCP ports filtering
• Supports flexible header filtering
• Allows the BMC to share the MAC address with the host OS
• Standard alerting capability to notify IT of system events
• Enables system boot up via the LAN (32 bit and 64 bit)
• Flash interface for PXE image
• Easy system monitoring with industry-standard consoles
• Remote network management capabilities through Desktop Management Interface (DMI) 2.0
• Packet recognition and wake-up for LAN on motherboard applications without software
• Enables system boot up via iSCSI
• Provides additional network management capability
• Enables the software to monitor and control the PHY
• Used to give an indication to the manageability firmware or external devices that the chip or
• Supports backplane and fiber-based applications as well as copper-based applications via the
• Allows seamless connection to industry-standard SFP pluggable copper and fiber modules
• Auto detection and switching between copper/fiber interfaces
• Link and activity indications (10, 100 and 1000 Mbps) on each port
• Lower component count and reduced system cost
• Simplified testing using boundary scan
• Supports the IDCODE instruction
• Lower cost
• Better airflow
• Better thermal characteristics
the regular tagging, which may be optionally added. This mode is used for networks where the
switches add an additional tag containing switching information.
Controller (BMS) via NC-SI or SMBus
and SNMP software
configuration
the driver is not functioning
SGMII interface