LAN9221-ABZJ SMSC, LAN9221-ABZJ Datasheet - Page 42

• Manufacturer Part Number: LAN9221-ABZJ
• Description: IC ETHERNET CTRLR 16BIT 56-QFN
• Manufacturer: SMSC
• Type: Single Chip MAC and PHY Controllerr

Specifications of LAN9221-ABZJ

• Controller Type: Ethernet Controller, MAC/PHY
• Interface: Serial EEPROM
• Voltage - Supply: 3.3V
• Current - Supply: 85mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 56-QFN
• Product: Ethernet Controllers
• Number Of Transceivers: 1
• Standard Supported: IEEE 802.3 or IEEE 802.3u
• Data Rate: 10 Mbps or 100 Mbps
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 0 V
• Supply Current (max): 99.2 mA, 137.3 mA
• Maximum Operating Temperature: + 70 C
• Ethernet Connection Type: 10BASE-T or 100BASE-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• No. Of Ports: 2
• Ethernet Type: IEEE 802.3 / 802.3u
• Interface Type: HBI
• Supply Current: 85mA
• Supply Voltage Range: 1.62V To 3.6V
• Operating Temperature Range: 0°C To +70°C
• Rohs Compliant: Yes
• For Use With: 638-1074 - EVALUATION BOARD LAN9221-ABZJ
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 638-1073

Revision 1.0 (05-17-10)
Figure 6.2
EEPROM Configuration:
PME signaling configuration (as determined by PHY Mode)
Note: A POR occurring when PME_MODE_SEL = 1 and an EEPROM present with the GPIO PME
GPIO PME Enable
GPIO PME Configuration
GPIO PME Length
GPIO PME Polarity
GPIO PME Buffer Type
GPIO PME WOL Select
GPIO10 Detection Select
Power Method
MAC address for Magic Packet
GPIO0 signals PME
GPIO1 is PME_MODE_SEL
Enable set results in the device entering PME Mode.
flowcharts PME operation while in Internal PHY mode. The following conditions hold:
= 1 (self powered)
= 0 (NA)
= 1 (enabled)
= 1 (high level signals event)
= 1 (Push-Pull)
= 0 (Magic Packet wakeup)
= 0 (PME signaled via level on GPIO pin)
= 0 (Active-low detection)
DATASHEET
42
USB 2.0 to 10/100 Ethernet Controller
SMSC LAN950x Family
Datasheet