20-101-0525 Rabbit Semiconductor, 20-101-0525 Datasheet - Page 20

• Manufacturer Part Number: 20-101-0525
• Description: COMPUTER SINGLE-BOARD LP3500 FOX
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0525

• Module/board Type: Single Board Computer Module
• Product: Modules
• Processor Type: Rabbit 3000
• Sram: 512 KB
• Flash: 512 KB
• Timers: 8 bit, 10 bit
• Number Of I/os: 26
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 3 V to 30 V
• Board Size: 93 mm x 66 mm x 11 mm
• Description/function: Computer Module
• For Use With/related Products: LP3500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1115

2.3 Installing Dynamic C
If you have not yet installed Dynamic C version 7.26P (or a later version), do so now by
inserting the Dynamic C CD in your PC’s CD-ROM drive. The CD will auto-install unless
you have disabled auto-install on your PC.
If the CD does not auto-install, click
browse for the Dynamic C
installation once you have selected the
The Dynamic C User’s Manual provides detailed instructions for the installation of
Dynamic C and any future upgrades.
2.4 Starting Dynamic C
Once the LP3500 is connected to your PC and to a power source, start Dynamic C by dou-
ble-clicking on the Dynamic C icon on your desktop or in your
If you are using a USB port to connect your computer to the LP3500, choose
Project Options
Click
Dynamic C assumes, by default, that you are using serial port COM1 on your PC when
you are running a program. If you are using COM1, then Dynamic C should detect the
LP3500 and go through a sequence of steps to cold-boot the LP3500 and to compile the
BIOS. If the error message “Rabbit Processor Not Detected” appears, you have probably
connected to a different PC serial port such as COM2, COM3, or COM4. You can change
the serial port used by Dynamic C with the
recognize the LP3500 by selecting
Try the different COM ports in the
nected to. If you still can’t get Dynamic C to recognize the target on any port, then the
hookup may be wrong or the COM port might not working on your PC.
Dynamic C automatically uses a maximum debug baud rate of 38,400 bps when an
LP3500 series board is in use.
14
OK
NOTE: If you have an earlier version of Dynamic C already installed, the default instal-
.
lation of the later version will be in a different folder, and a separate icon will appear on
your desktop.
and select “Use USB to Serial Converter” on the
setup.exe
Reset Target/Compile BIOS
OPTIONS
Start > Run
setup.exe
file on your CD drive. Click
OPTIONS
menu until you find the one you are con-
from the Windows
file.
menu, then try to get Dynamic C to
Start
on the
Communications
Start
menu.
OK
Compile
to begin the
button and
Options >
Fox (LP3500)
menu.
tab.