20-101-0525 Rabbit Semiconductor, 20-101-0525 Datasheet - Page 17

• Manufacturer Part Number: 20-101-0525
• Description: COMPUTER SINGLE-BOARD LP3500 FOX
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0525

• Module/board Type: Single Board Computer Module
• Product: Modules
• Processor Type: Rabbit 3000
• Sram: 512 KB
• Flash: 512 KB
• Timers: 8 bit, 10 bit
• Number Of I/os: 26
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 3 V to 30 V
• Board Size: 93 mm x 66 mm x 11 mm
• Description/function: Computer Module
• For Use With/related Products: LP3500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1115

3. Connect the programming cable to download programs from your PC and to program
Connect the 10-pin
board. Ensure that the colored edge lines up with pin 1 as shown. There is a small dot on the
circuit board next to pin 1 of header J5. (Do not use the
monitoring only.) Connect the other end of the programming cable to a COM port on your
PC. Make a note of the port to which you connect the cable, as Dynamic C will need to
have this parameter configured. Note that COM1 on the PC is the default COM port used
by Dynamic C.
User’s Manual
and debug the LP3500.
NOTE: Use only the programming cable that has a red shrink wrap around the RS-232
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use an
level converter (Part No. 101-0513), which is supplied with the LP3500 Tool Kit. Other
Rabbit programming cables with clear or blue shrink wrap might not be voltage-com-
patible or their connector sizes may be different.
RS-232/USB converter (Part No. 20-151-0178) with the programming cable supplied with
the LP3500 Tool Kit. Note that not all RS-232/USB converters work with Dynamic C.
Figure 4. Programming Cable and Power Supply Connections
PROG
connector of the programming cable to header J5 on the LP3500
DIAG
connector, which is used for
11