MCP4021-202E/SN Microchip Technology, MCP4021-202E/SN Datasheet - Page 59

• Manufacturer Part Number: MCP4021-202E/SN
• Description: IC DGTL POT 2.1K 1CH 8SOIC
• Manufacturer: Microchip Technology

Specifications of MCP4021-202E/SN

• Memory Type: Non-Volatile
• Taps: 64
• Resistance (ohms): 2.1K
• Number Of Circuits: 1
• Temperature Coefficient: 150 ppm/°C Typical
• Interface: Up/Down
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Resistance In Ohms: 2.10K
• End To End Resistance: 2.1kohm
• Resistance Tolerance: ± 20%
• No. Of Steps: 64
• Supply Voltage Range: 2.7V To 5.5V
• Control Interface: Serial
• No. Of Pots: Single
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCP4XXXDM-DB - BOARD DAUGHTER DIGIPOT MCP4XXXMCP402XEV - BOARD EVAL FOR MCP402X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

APPENDIX A:
Revision E (December 2006)
• Added device designators in conditions column to
• Added device designations in conditions column
• Added disclaimers to package outline drawings.
Revision D (October 2006)
• Changed the EEPROM write cycle time (T
• For the 10 kΩ device, the rheostat differential
• Figure 2-9 in Section 2.0 “Typical Performance
• Added Figure 2-48 for -3 db Bandwidth
• Updated available Development Tools.
• Added disclaimer to package outline drawings.
Revision C (November 2005)
• Enhanced Descriptions
• Reordered Sections
• Added 8-lead MSOP and DFN packages
Revision B (April 2005)
• Updated part numbers in Product Identifcation
• Added Appendix A: Revision History
Revision A (April 2005)
• Original Release of this Document
© 2006 Microchip Technology Inc.
associate units (MHz) in Bandwidth -3 dB
parameter in AC/DC Characteristics table
for R-INL and R-DNL specifications.
from a maximum of 5 ms to a maximum of 10 ms
(overvoltage and temperature) with a typical of
5 ms
non-linearity specification at 2.7V was changed
from ±0.5 LSb to ±1.0 LSb
Curves” was updated with the correct data.
information.
Section (PIS)
REVISION HISTORY
WC
)
MCP4021/2/3/4
DS21945E-page 59