MCP4021-202E/SN Microchip Technology, MCP4021-202E/SN Datasheet - Page 51

• Manufacturer Part Number: MCP4021-202E/SN
• Description: IC DGTL POT 2.1K 1CH 8SOIC
• Manufacturer: Microchip Technology

Specifications of MCP4021-202E/SN

• Memory Type: Non-Volatile
• Taps: 64
• Resistance (ohms): 2.1K
• Number Of Circuits: 1
• Temperature Coefficient: 150 ppm/°C Typical
• Interface: Up/Down
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Resistance In Ohms: 2.10K
• End To End Resistance: 2.1kohm
• Resistance Tolerance: ± 20%
• No. Of Steps: 64
• Supply Voltage Range: 2.7V To 5.5V
• Control Interface: Serial
• No. Of Pots: Single
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCP4XXXDM-DB - BOARD DAUGHTER DIGIPOT MCP4XXXMCP402XEV - BOARD EVAL FOR MCP402X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

9.0
9.1
Currently there are three boards that are available that
can be used to evaluate the MCP4021/2/3/4 family of
devices.
1.
2.
3.
4.
These boards may be purchased directly from the
Microchip web site at www.microchip.com.
© 2006 Microchip Technology Inc.
The MCP402X Digital Potentiomenter Evalua-
tion Board kit (MCP402XEV) contains a simple
demonstration board utilizing a PIC10F206, the
MCP4021 and a blank PCB, which can be
populated with any desired MCP4021/2/3/4
device in a SOT-23-5, SOT-23-6 or 150 mil
SOIC 8-pin package.
This board has two push buttons to control when
the PIC
serial commands. The example firmware dem-
onstrates the following commands:
• Increment
• Decrement
• High-Voltage Increment and Enable
• High-Voltage Decrement and Enable
• High-Voltage Increment and Disable
• High-Voltage Decrement and Disable
The populated board (with the MCP4021) can
be used to evaluate the other MCP402X devices
by appropriately jumpering the PCB pads.
The SOT-23-5/6 Evaluation Board (VSUPEV2)
can be used to evaluate the characteristics of
the
devices.
The 8-pin SOIC/MSOP/TSSOP/DIP Evaluation
Board (SOIC8EV) can be used to evaluate the
characteristics of the MCP4021 device in either
the SOIC or MSOP package.
The MCP4XXX Digital Potentiometer Daughter
Board allows the system designer to quickly
evaluate the operation of Microchip Technol-
ogy's MCP42XXX and MCP402X Digital Poten-
tiometers. The board supports two MCP42XXX
devices and an MCP402X device, which can be
replaced with an MCP401X device.
The board also has a voltage doubler device
(TC1240A), which can be used to show the
WiperLock™
MCP4021.
WiperLock Technology
WiperLock Technology
WiperLock Technology
WiperLock Technology
DEVELOPMENT SUPPORT
Evaluation/Demonstration Boards
MCP4022,
®
microcontroller generates MCP402X
Technology
MCP4023
feature
and
MCP4024
of
the
MCP4021/2/3/4
DS21945E-page 51