SSTUA32866EC/G-T NXP Semiconductors, SSTUA32866EC/G-T Datasheet - Page 24

• Manufacturer Part Number: SSTUA32866EC/G-T
• Manufacturer: NXP Semiconductors

Specifications of SSTUA32866EC/G-T

• Logic Family: SSTU
• Logical Function: Registered Buffer
• Number Of Elements: 1
• Number Of Bits: 25
• Number Of Inputs: 25
• Number Of Outputs: 25
• High Level Output Current: -8mA
• Low Level Output Current: 8mA
• Propagation Delay Time: 3ns
• Operating Supply Voltage (typ): 1.8V
• Operating Supply Voltage (max): 2V
• Operating Supply Voltage (min): 1.7V
• Clock-edge Trigger Type: Posit/Negat-Edge
• Polarity: Non-Inverting
• Technology: CMOS
• Frequency (max): 450(Min)MHz
• Mounting: Surface Mount
• Pin Count: 96
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Compliant

NXP Semiconductors
SSTUA32866_2
Product data sheet
13.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 11.
Table 12.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
2.5
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 11
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
12
28.
Rev. 02 — 26 March 2007
Package reflow temperature ( C)
Volume (mm
< 350
235
220
Package reflow temperature ( C)
Volume (mm
< 350
260
260
250
1.8 V DDR2-667 configurable registered buffer with parity
3
3
)
)
Figure
350 to 2000
260
250
245
28) than a PbSn process, thus
220
220
350
SSTUA32866
> 2000
260
245
245
© NXP B.V. 2007. All rights reserved.
24 of 28