ISP1161A1BMGA STEricsson, ISP1161A1BMGA Datasheet - Page 12

no-image

ISP1161A1BMGA

Manufacturer Part Number
ISP1161A1BMGA
Description
Manufacturer
STEricsson
Datasheet

Specifications of ISP1161A1BMGA

Operating Temperature (max)
85C
Operating Temperature (min)
-40C
Operating Temperature Classification
Industrial
Mounting
Surface Mount
Lead Free Status / RoHS Status
Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ISP1161A1BMGA
Manufacturer:
EPCOS
Quantity:
6 700
Part Number:
ISP1161A1BMGA
Manufacturer:
ST-Ericsson Inc
Quantity:
10 000
Company:
Part Number:
ISP1161A1BMGA
Quantity:
3 000
8. Microprocessor bus interface
ISP1161A1_5
Product data sheet
8.1 Programmed I/O (PIO) addressing mode
8.2 DMA mode
permanently on. Upon each successful packet transfer (with ACK) to and from the
ISP1161A1 the LED will blink off for 100 ms. During ‘suspend’ state the LED will remain
off.
This feature provides a user-friendly indication of the status of the USB device, the
connected hub and the USB traffic. It is a useful field diagnostics tool for isolating faulty
equipment. It can therefore help to reduce field support and hotline overhead.
A generic PIO interface is defined for speed and ease-of-use. It also allows direct
interfacing to most microcontrollers. To a microcontroller, the ISP1161A1 appears as a
memory device with a 16-bit data bus and uses only two address lines: A1 and A0 to
access the internal control registers and FIFO buffer RAM. Therefore, the ISP1161A1
occupies only four I/O ports or four memory locations of a microprocessor. External
microprocessors can read from or write to the ISP1161A1 internal control registers and
FIFO buffer RAM through the Programmed I/O (PIO) operating mode.
Programmed I/O interface between a microprocessor and an ISP1161A1.
The ISP1161A1 also provides DMA mode for external microprocessors to access its
internal FIFO buffer RAM. Data can be transferred by DMA operation between a
microprocessor’s system memory and the ISP1161A1 internal FIFO buffer RAM.
Remark: The DMA operation must be controlled by the external microprocessor system
DMA controller (Master).
Fig 8.
Programmed I/O interface between a microprocessor and an ISP1161A1.
Rev. 05 — 29 September 2009
PROCESSOR
MICRO-
D [ 15:0 ]
IRQ1
IRQ2
WR
RD
CS
A2
A1
μP bus I/F
USB single-chip host and device controller
D [ 15:0 ]
RD
WR
CS
A1
A0
INT1
INT2
ISP1161A1
004aaa178
ISP1161A1
© ST-ERICSSON 2009. All rights reserved.
Figure 8
shows the
12 of 137

Related parts for ISP1161A1BMGA