CPC5602C Clare, CPC5602C Datasheet - Page 12

• Manufacturer Part Number: CPC5602C
• Description: MOSFET N-CH 350V 5MA SOT-223
• Manufacturer: Clare

Specifications of CPC5602C

• Fet Type: MOSFET N-Channel, Metal Oxide
• Fet Feature: Depletion Mode
• Rds On (max) @ Id, Vgs: 14 Ohm @ 50mA, 350mV
• Drain To Source Voltage (vdss): 350V
• Current - Continuous Drain (id) @ 25° C: 5mA
• Input Capacitance (ciss) @ Vds: 300pF @ 0V
• Power - Max: 2.5W
• Mounting Type: Surface Mount
• Package / Case: SOT-223 (3 leads + Tab), SC-73, TO-261
• Transistor Polarity: N-Channel
• Resistance Drain-source Rds (on): 14 Ohms
• Continuous Drain Current: 5 mA
• Power Dissipation: 2.5 W
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Gate Charge (qg) @ Vgs: -
• Vgs(th) (max) @ Id: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CPC2400E
AT Command Set
12
Command
X
Call Progress
Function and Description
The X command controls whether or not a busy signal or dial tone should be detected when dialing.
The X command also limits the result codes the modem may return when dialing. The operation of the
X command is configurable for operation in different countries.
X0
X1
X2
X3
X4
The @ and W dial modifiers are not affected by the X command. The @ dial modifier may return the
result codes 8 (NO ANSWER) or 7 (BUSY) each time it appears in the dial string. The W dial modifier
may return the result codes 6 (NO DIALTONE) or 7 (BUSY) each time it appears in the dial string.
Neither busy signal nor dial tone are detected. When a telephone line connection is made the
result code does not indicate the telephone line data rate.
Neither busy signal nor dial tone are detected. When a telephone line connection is made the
result code indicates the telephone line data rate.
Busy signal is not detected. Dial tone is detected. When a telephone line connection is made
the result code indicates the telephone line data rate.
Busy signal is detected. Dial tone is not detected. When a telephone line connection is made
the result code indicates the telephone line data rate.
Both busy signal and dial tone are detected. When a telephone line connection is made the
result code indicates the telephone line data rate. This is the default value in North America.
www.clare.com
Rev. 2