CS42526-CQZR Cirrus Logic Inc, CS42526-CQZR Datasheet - Page 58

• Manufacturer Part Number: CS42526-CQZR
• Description: Audio CODECs IC 114dB 192kHz 6Ch Mlt-Ch CODEC
• Manufacturer: Cirrus Logic Inc

Specifications of CS42526-CQZR

• Number Of Adc Inputs: 2
• Number Of Dac Outputs: 6
• Conversion Rate: 192 KSPs
• Interface Type: Serial (SPI)
• Resolution: 24 bit
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Package / Case: LQFP-64
• Minimum Operating Temperature: - 10 C
• Number Of Channels: 2 ADC, 6 DAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

58
6.11.3
6.11.4 SERIAL AUDIO INTERFACE SERIAL PORT MUTE (MUTE SAI_SP)
6.11.5 SOFT VOLUME RAMP-UP AFTER ERROR (RMP_UP)
6.11.6 SOFT RAMP-DOWN BEFORE FILTER MODE CHANGE (RMP_DN)
AUTO-MUTE (AMUTE)
Note:
Note:
Default = 1
0 - Disabled
1 - Enabled
Function:
Default = 0
0 - Disabled
1 - Enabled
Function:
Default = 0
0 - Disabled
1 - Enabled
Function:
Default = 0
0 - Disabled
1 - Enabled
Function:
The digital-to-analog converters of the CS42526 will mute the output following the reception of 8192
consecutive audio samples of static 0 or -1. A single sample of non-static data will release the mute.
Detection and muting is done independently for each channel. The quiescent voltage on the output
will be retained, and the MUTEC pin will go active during the mute period. The muting function is af-
fected, similar to volume control changes, by the Soft and Zero Cross bits (SZC[1:0]).
When enabled, the Serial Audio Interface port (SAI_SP) will be muted.
An un-mute will be performed after executing a filter mode change, after a MCLK/LRCK ratio change
or error, and after changing the Functional Mode. When this feature is enabled, this un-mute is affect-
ed, similar to attenuation changes, by the Soft and Zero Cross bits (SZC[1:0]). When disabled, an
immediate un-mute is performed in these instances.
A mute will be performed prior to executing a filter mode or de-emphasis mode change. When this
feature is enabled, this mute is affected, similar to attenuation changes, by the Soft and Zero Cross
bits (SZC[1:0]). When disabled, an immediate mute is performed prior to executing a filter mode or
de-emphasis mode change.
For best results, it is recommended that this bit be used in conjunction with the RMP_DN bit.
For best results, it is recommended that this bit be used in conjunction with the RMP_UP bit.
CS42526
DS585F1