D4BL-1CRG-A Omron, D4BL-1CRG-A Datasheet - Page 4

• Manufacturer Part Number: D4BL-1CRG-A
• Description: Locking Solenoid Safety Switch
• Manufacturer: Omron
• Series: D4BLr

Specifications of D4BL-1CRG-A

• Lead Free Status / Rohs Status: Details

Characteristics
Note: The above values are initial values.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are sufficient for
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%.
*3. These figures are minimum requirements for safe operation.
Solenoid Coil Characteristics
Indicator Characteristics
Degree of protection *1
Durability *2
Operating speed
Operating frequency
Direct opening force *3
Direct opening travel *3
Holding force
Contact resistance
Rated insulation voltage (U
Rated frequency
Protection against electric shock
Pollution degree (operating environment)
Impulse withstand
voltage
(EN60947-5-1)
Insulation resistance
Contact gap
Vibration resistance
Shock resistance
Conditional short-circuit current
Conventional enclosed thermal current (I
Ambient operating temperature
Ambient operating humidity
Weight
Item
Rated operating voltage
Current consumption
Insulation class
Rated voltage
Current leakage
Color (LED)
the operating conditions and environment beforehand. Although the switch box is protected from dust, oil or water penetration, do not use the
D4BL in places where dust, oil, water, or chemicals may enter through the key hole on the head, otherwise Switch damage or malfunctioning
may occur.
Mechanical
Electrical
Between terminals
of same polarity
Between terminals
of different polarity
Between each
terminal and
ground
Between solenoid
and ground
Malfunction
Destruction
Malfunction
Type
i
)
24 VDC mechanical lock models 110 VAC mechanical lock models
24 VDC
Approx. 300 mA
10 to 115 VAC/VDC
Approx. 1 mA
Orange, green
the
) 10 A (EN60947-5-1)
+10%
−15%
IP67 (EN60947-5-1)
1,000,000 operations min.
500,000 operations min. (10 A resistive load at 250 VAC)
0.05 to 0.5 m/s
30 operations/minute max.
19.61 N min. (EN60947-5-1)
20 mm min. (EN60947-5-1)
700 N min. (GS-ET-19)
50 mΩ max.
300 V (EN60947-5-1)
50/60 Hz
Class I (with ground terminal)
3 (EN60947-5-1)
4 kV
2.5 kV
100 MΩ min. (at 500 VDC)
2 × 2 mm min.
10 to 55 Hz, 0.35 mm single amplitude
1,000 m/s
300 m/s
100 A (EN60947-5-1)
–10 to 55°C (with no icing)
95% max.
Approx. 800 g
(100% ED)
2
min.
2
min.
110 VAC ±10% (50/60 Hz)
Class F (130°C or less)
Approx. 98 mA
24 VDC solenoid lock models
24 VDC
Approx. 300 mA
+10%
−15%
(100% ED)
D4BL
4