STEVAL-MKI107V1 STMicroelectronics, STEVAL-MKI107V1 Datasheet - Page 20

• Manufacturer Part Number: STEVAL-MKI107V1
• Description: Power Management Modules & Development Tools L3G4200D Adapter BRD MEMS Evaluation
• Manufacturer: STMicroelectronics
• Type: Other Power Managementr

Specifications of STEVAL-MKI107V1

• Product: Power Management Development Tools
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Supported commands
UM0979
Accelerometer FIFO mode enable
The *fifomde command is used to enable the accelerometer FIFO mode. For more details
see the AN3308 application note.
Accelerometer Stream to FIFO mode enable
The *fifotrg command enables the accelerometer stream to FIFO mode. For more details
see the AN3308 application note.
Accelerometer FIFO reset enable
The *fiforst command enables the accelerometer FIFO reset mode. For more details see the
AN3308 application note.
Gyroscope FIFO stream mode enable
The *fifostr command is used to enable the gyroscope FIFO stream mode.
Gyroscope FIFO mode enable
The *gfifomde command is used to enable the gyroscope FIFO mode.
Gyroscope Stream to FIFO mode enable
The *gfifotrg command enables the gyroscope stream to FIFO mode.
Gyroscope FIFO reset enable
The *gfiforst command enables the gyroscope FIFO reset mode.
Gyroscope FIFO bypass to stream enable
The *gfifobts command enables the gyroscope bypass to stream mode.
PDON and PDOFF
The *PDON and *PDOFF commands are employed respectively to set to 1, and to clear to
0, the “power-down” pin in analog devices.
STON and STOFF
The *STON and *STOFF commands are employed respectively to set to 1, and to clear to 0,
the “self test” pin in analog devices.
HPON and HPOFF
The *HPON and *HPOFF commands are employed respectively to set to 1, and to clear to
0, the “high-pass filter” pin in analog devices.
FSON and FSOFF
The *FSON and *FSOFF commands are employed respectively to set to 1 and to clear to 0
the “full scale” pin in analog devices.
20/32
Doc ID 17768 Rev 1