MPC8572EAMC Freescale Semiconductor, MPC8572EAMC Datasheet - Page 15

• Manufacturer Part Number: MPC8572EAMC
• Description: MPC8572 AMC RAPID SYSTEM
• Manufacturer: Freescale Semiconductor
• Type: MPUr

Specifications of MPC8572EAMC

• Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MPC8572E

Chapter 2
Hardware Preparation and Installation
This chapter details the unpacking instructions, hardware preparation and installation instructions for the
MPC8572EAMC processor board. For details on hardware preparation, please refer to the
MPC8572EAMC Hardware Getting Started Guide (MPC8572EAMCGSG).
2.1
2.2
Perform the following steps in the order listed to install the MPC8572EAMC Processor Board properly.
Freescale Semiconductor
•
•
•
1. Verify that jumpers and switches are in their default positions (See
2. Connect external cables in accordance with your needs (See
3. Insert the board into the carrier/chassis as per the specific chassis operating instructions.
4. Switch on the power to the chassis.
5. Check for completion of the reset sequence indicated by the LEDs; see
6. Check for the blue front panel LED and power good LEDs being illuminated. (A full description
7. Insert the AdvancedMC front panel handle and check that the blue LED blinks twice then goes out.
Unpack equipment from shipping carton
Refer to packing list and verify that all items are present
Save packing material for storing and reshipping of equipment
Indicators,” for a list of default positions).
for more details).
full description of the LEDs is given in
of the LED operation is given in
Then check for completion of the reset sequence by verifying the following LEDs:
— The “System Status” LED, LD507, switches on, then goes off once system configuration is
Unpacking Instructions
Installation Instructions
complete. LD506 should stay on indicating the processor is “Ready.”
Upon receipt, if the shipping carton is damaged, request the carrier agent be
present during the unpacking and inspection of the equipment.
Avoid touching areas of integrated circuitry as static discharge
can damage board devices.
MPC8572EAMC Advanced Mezzanine Card User Guide, Rev. 1.2
Section 4.3,
CAUTION
Table
NOTE
“LEDs”). This indicates the board power is applied.
4-3.
Section 1.3.1, “External
Chapter 4, “Controls and
Figure 4-1
for locations. A
Connectors,”
2-1