MT5634ZBA-GLOBAL Multi-Tech Systems, MT5634ZBA-GLOBAL Datasheet - Page 34

• Manufacturer Part Number: MT5634ZBA-GLOBAL
• Description: MODEM V.90 DATA/FAX GLOBAL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZBAr

Specifications of MT5634ZBA-GLOBAL

• Data Format: V.90
• Mounting Type: Desktop
• Package / Case: 5.7" L x 4.3" W x 1.0" H (145mm x 109mm x 25mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply: -
• Interface: -
• Other names: 881-1149; MT5634ZBA-GLOBAL

+VDR Distinctive Ring Report
Description:
Syntax:
Values:
Reports:
#P
Description:
Syntax:
Values:
Default:
#S
Description:
Syntax:
Values:
Default Password: MTSMODEM
Response:
#S=
Description:
Syntax:
Values:
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
Enables reporting of ring cadence information to the DTE and specifies the minimum
ring cadence that will be reported.
The report format is one line per silence period and one line per ring period. The
length of the silence period is in the form DROF=number in units of 100
ms<CR><LF>, and the length of the ring is in the form DRON=number in units of 100
ms<CR> <LF>. The modem may produce a Ring event code after the DRON
message if enabled by the y parameter. The y parameter must be set to a value
equal to or smaller than the expected ring cadence.
AT+VDR=<value x>, <value y>
x = 0, 1 Distinctive Ring report control. Default = 0.
y = 0–255 Minimum ring interval in 100 ms units. Default = 0.
+VDR=0, N/A
+VDR=1, 0
+VDR=1, >0
+VDR=?
+VDR?
Set 11-bit Parity
Sets 11-bit parity.
Note:
AT#P<value>
0
1
2
2
Enter Setup Password
Verifies the Callback Security Password and allows the user to modify the Callback
Security settings.
Note:
AT#S<password>
password (1–8 characters, case sensitive)
OK if password is correct
ERROR if password is incorrect
Store Setup Password
Stores a new remote configuration setup or Callback Security password, depending
upon the model.
Note:
AT#S=x
x stands for password (1–8 characters, case sensitive)
No parity.
Odd parity.
Even parity.
This command does not work with parallel, USB, PCI, PCIe.
This command does not work with parallel, USB, PCI, PCIe.
This command does not work with parallel, USB, PCI, PCIe.
Disables Distinctive Ring cadence reporting.
Enables Distinctive Ring cadence reporting. Other call progress
result codes (including RING) are reported as normal.
Enables Distinctive Ring cadence reporting. The RING result code is
reported after the falling edge of the ring pulse (i.e., after the DRON
report).
Displays the allowed values.
Displays the current value.
Chapter 1 – AT Commands, S-Registers, and Result Codes
34