MT5634ZBA-GLOBAL Multi-Tech Systems, MT5634ZBA-GLOBAL Datasheet - Page 17

• Manufacturer Part Number: MT5634ZBA-GLOBAL
• Description: MODEM V.90 DATA/FAX GLOBAL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZBAr

Specifications of MT5634ZBA-GLOBAL

• Data Format: V.90
• Mounting Type: Desktop
• Package / Case: 5.7" L x 4.3" W x 1.0" H (145mm x 109mm x 25mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply: -
• Interface: -
• Other names: 881-1149; MT5634ZBA-GLOBAL

&W
Description:
Syntax:
Values:
Default:
Result Codes:
&Z
Description:
Syntax:
Values:
Default:
Result Codes:
Example:
Note:
\A
Description:
Syntax:
Values:
Default:
Result Codes:
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
Store Current Configuration
Use this command to store the modem's command options and all S- registers
except S3, S4, and S5. The Z0 command or a power-up reset of the modem restores
these profiles.
Note:
AT&W<value>
0
0
OK if <value> = 0.
ERROR if <value> ≠ 0.
Store Dialing Location and Number
Use this command to store a dialing string. Controller-based modems can save three
dialing stings.
The format for the command is &Z<storage_location> = <dialing_string>.
The dial string may contain up to 40 characters.
The ATDS=<storage_location> command dials using the stored string.
AT&Z<location>=<stored number>
<storage_location> = 0 to 2 for serial; 0 to 1 for parallel.
<dialing_string> = Dialing number.
None
OK if <value> = 0 to 2.
ERROR if <value> ≠ 0 to 2.
AT&Z0=5550123
The command to Store Dialing Location and Number for Callback Security
operates differently from the normal Store Dialing Location and Number.
To store a Callback Security number, type the following:
Select Maximum MNP Block Size
Use this command to select a MNP error corrected link with a maximum block size
controlled by the parameter <block size>.
AT\A<value>
0
1
2
3
3
OK if <value> = 0 to 3.
ERROR if <value> ≠ 0 to 3.
AT&Zy=[+][-]ATzDvx[,?]
Example: AT&Z0=ATM0DT5551212
where:
This command is not valid during a cellular call.
128-character maximum
192-character maximum
Stores current configuration as profile 0.
64-character maximum
256-character maximum
y is the memory location (0-29)
z stands for additional commands
v stands for the choice of T for Tone Dialing or P for Pulse Dialing
x is the phone number
? stands for the optional callback number
Chapter 1 – AT Commands, S-Registers, and Result Codes
17