4010-DAAKF_434 Silicon Laboratories Inc, 4010-DAAKF_434 Datasheet - Page 4

• Manufacturer Part Number: 4010-DAAKF_434
• Description: KIT DEV KEYFOB 434MHZ FOR SI4010
• Manufacturer: Silicon Laboratories Inc
• Series: EZRadio®r
• Type: Key Fobr

Specifications of 4010-DAAKF_434

• Frequency: 434MHz
• Wireless Frequency: 27 MHz to 960 MHz
• Modulation: FSK, OOK
• Output Power: 10 dBm
• Antenna: SMA
• For Use With/related Products: Si4010
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 336-1981

Si4010-Key Fob-DK
1.2. Usage of the Key Fob Development Platform
The Silicon Labs IDE communicates with the USB Debug Adapter through the USB bus. The following debugging
scenarios are possible:
1. EC3 debug adapter  Burning adapterSi4010 socketed key fob development board
This setup is suitable for downloading, running, and debugging the program in RAM or burning the program in the
NVM and running it. The antenna or measuring instrument can be connected through an SMA connector. Since
sockets on board allow use of unsoldered ICs, this is the ideal scenario for burning the NVM memory of Si4010.
2. EC3 debug adapter  Burning adapter Si4010 SOIC key fob development board
This setup is suitable for downloading, running, and debugging the program in RAM. This board has a PCB
antenna and battery, so after downloading the program and starting the execution by disconnecting in the IDE, the
board can be physically disconnected from the programming interface and tested in mobile form. A switch is
provided on the board to connect/disconnect the battery.
Note: Although burning is also possible with this setup, it is not practical since Si4010 is soldered on the key fob development
board.
4
Rev. 0.1