C8051F353-GM Silicon Laboratories Inc, C8051F353-GM Datasheet - Page 83

• Manufacturer Part Number: C8051F353-GM
• Description: IC 8051 MCU 8K FLASH 28MLP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F35xr

Specifications of C8051F353-GM

• Program Memory Type: FLASH
• Program Memory Size: 8KB (8K x 8)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 17
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x16b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: I2C/SMBus/SPI/UART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: KSK-SL-TOOLSTICK, PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F350DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 16-bit
• On-chip Dac: 2-ch x 8-bit
• No. Of I/o's: 17
• Ram Memory Size: 768Byte
• Cpu Speed: 50MHz
• No. Of Timers: 4
• Rohs Compliant: Yes
• Package: 28QFN
• Device Core: 8051
• Family Name: C8051F35x
• Maximum Speed: 50 MHz
• Data Rom Size: 128 B
• Height: 0.88 mm
• Length: 5 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Width: 5 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 770-1006 - ISP 4PORT FOR SILABS C8051F MCU336-1083 - DEV KIT FOR F350/351/352/353
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1273

9.1.
Figure 9.3 shows the external pin connections for the comparator. The positive and negative inputs to the
comparator can each be routed to one of eight different pins using the comparator mux. Comparator out-
puts can optionally be routed to port pins using the Crossbar circuitry.
The comparator inputs (CP0+ and CP0–) are selected in the CPT0MX register (SFR Definition 9.3). The
CMX0P1–CMX0P0 bits select the comparator’s positive input; the CMX0N1–CMX0N0 bits select the com-
parator’s negative input. Important Note About Comparator Inputs: The Port pins selected as compara-
tor inputs should be configured as analog inputs in their associated Port configuration register, and
configured to be skipped by the Crossbar.
Two versions of the comparator output can be routed to port pins, using the Port I/O Crossbar. The raw
(asynchronous) comparator output CP0A is enabled using bit 5 in the XBR0 register, and will be available
at P1.4. The CP0 output (synchronized to SYSCLK) is available at P1.5 when it is enabled with bit 4 in the
XBR0 register.
Comparator0 Inputs and Outputs
P0.0
P0.2
P0.4
P0.6
P1.0
P1.2
P1.4
P1.6
P0.1
P0.3
P0.5
P0.7
P1.1
P1.3
P1.5
P1.7
Figure 9.3. Comparator Pin Connections
CP0 +
CP0 -
Rev. 1.1
CPT0MX
+
-
GND
VDD
(SYNCHRONIZER)
D
SET
CLR
Q
Q
D
SET
CLR
Q
Q
C8051F350/1/2/3
XBR0
0
1
0
1
CP0A
CP0
P1.5
P1.4
83