C8051F332-GM Silicon Laboratories Inc, C8051F332-GM Datasheet - Page 38

• Manufacturer Part Number: C8051F332-GM
• Description: IC 8051 MCU 4KB FLASH 20QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F33xr

Specifications of C8051F332-GM

• Program Memory Type: FLASH
• Program Memory Size: 4KB (4K x 8)
• Package / Case: 20-QFN
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 17
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: I2C/SMBus/SPI/UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: KSK-SL-TOOLSTICK, PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F330DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• No. Of I/o's: 17
• Ram Memory Size: 768Byte
• Cpu Speed: 25MHz
• No. Of Timers: 4
• Rohs Compliant: Yes
• Package: 20QFN
• Device Core: 8051
• Family Name: C8051F33x
• Maximum Speed: 25 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 770-1006 - ISP 4PORT FOR SILABS C8051F MCU336-1451 - ADAPTER PROGRAM TOOLSTICK F330
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1266

5.
The ADC0 subsystem for the C8051F330/2/4 consists of two analog multiplexers (referred to collectively
as AMUX0) with 16 total input selections, and a 200 ksps, 10-bit successive-approximation-register ADC
with integrated track-and-hold and programmable window detector. The AMUX0, data conversion modes,
and window detector are all configurable under software control via the Special Function Registers shown
in Figure 5.1. ADC0 operates in both Single-ended and Differential modes, and may be configured to mea-
sure Ports0-1, the Temperature Sensor output, or V
tem is enabled only when the AD0EN bit in the ADC0 Control register (ADC0CN) is set to logic 1. The
ADC0 subsystem is in low power shutdown when this bit is logic 0.
5.1.
AMUX0 selects the positive and negative inputs to the ADC. Any of the following may be selected as the
positive input: Ports0-1, the on-chip temperature sensor, or the positive power supply (V
lowing may be selected as the negative input: Ports0-1, V
negative input, ADC0 operates in Single-ended Mode; all other times, ADC0 operates in Differential
Mode. The ADC0 input channels are selected in the AMX0P and AMX0N registers as described in SFR
Definition 5.1 and SFR Definition 5.2.
The conversion code format differs between Single-ended and Differential modes. The registers ADC0H
and ADC0L contain the high and low bytes of the output conversion code from the ADC at the completion
of each conversion. Data can be right-justified or left-justified, depending on the setting of the AD0LJST.
When in Single-ended Mode, conversion codes are represented as 10-bit unsigned integers. Inputs are
Sensor
Temp
10-Bit ADC (ADC0, C8051F330/2/4 only)
VREF
GND
VDD
P0.0
P0.7
P1.0
P1.7
P0.0
P0.7
P1.0
P1.7
Analog Multiplexer
18-to-1
18-to-1
AMUX
AMUX
Figure 5.1. ADC0 Functional Block Diagram
AMX0N
AMX0P
Rev. 1.7
DD
with respect to Ports0-1 or GND. The ADC0 subsys-
(+)
(-)
ADC0CF
REF
, or GND. When GND is selected as the
C8051F330/1/2/3/4/5
ADC
10-Bit
VDD
SAR
ADC0GTH ADC0GTL
ADC0LTH
ADC0CN
ADC0LTL
Conversion
Start
000
001
010
011
100
101
DD
32
). Any of the fol-
AD0WINT
Compare
Window
AD0BUSY (W)
Timer 0 Overflow
Timer 2 Overflow
Timer 1 Overflow
CNVSTR Input
Timer 3 Overflow
Logic
41