DSPIC30F6010-30I/PF Microchip Technology, DSPIC30F6010-30I/PF Datasheet - Page 11

• Manufacturer Part Number: DSPIC30F6010-30I/PF
• Description: IC DSPIC MCU/DSP 144K 80TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F6010-30I/PF

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 144KB (48K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TQFP, 80-VQFP
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of I/o's: 68
• Flash Memory Size: 144KB
• Supply Voltage Range: 2.5V To 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300019 - BOARD DEMO DSPICDEM 80L STARTERAC164314 - MODULE SKT FOR PM3 80PFDM300020 - BOARD DEV DSPICDEM MC1 MOTORCTRLAC30F001 - MODULE SOCKET DSPIC30F 80TQFPXLT80PT2 - SOCKET TRANSITION ICE 80TQFPDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: DSPIC30F601030IPF

22. Module: High I
23. Module: Regulating Voltage for
TABLE 3:
© 2008 Microchip Technology Inc.
Note 1:
This release of silicon draws a current (I
approximately 370 mA during any Row Erase
operation performed on program Flash memory.
Work arounds
Work around 1:
Supply the V
capable of sourcing a minimum of 300 mA of
current.
Work around 2:
When using a voltage regulator capable of driving
150 mA current, and if Brown-out Reset (BOR) is
enabled for a V
then connect a 1000 μF Electrolytic capacitor
across the V
If the Row Erase operation is performed as part of
a Run-Time Self-Programming (RTSP) operation,
the user should ensure that the device is operating
at less than 10 MIPS prior to the erase operation.
To ensure the device is operating at less than
10 MIPS, the application may post-scale the
system clock or switch to the Internal FRC
oscillator.
For this release of silicon, applications operating
off 5 volts V
remains between 4.75V and 5.5V. For 5V
applications, Table 3 summarizes the maximum
MIPS that can be achieved across various
temperatures.
Work around
For 5 volt applications, use a voltage regulator that
ensures V
to achieve 30 MIPS operation.
V
4.75 to 5.5
4.75 to 5.5
(in volts)
DD
Range
Applications that use the CAN peripherals and Data EEPROM should also refer to Errata 1. and 21.
DD
Program Flash Memory
5V/30 MIPS Applications
OPERATING MIPS VS. VOLTAGE
DD
DD
is in the range 4.75V to 5.5V, in order
DD
at 30 MIPS should ensure the V
pin and ground.
DD
DD
pin using a voltage regulator
greater than or equal to 4.2V,
During Row Erase of
Temp Range
-40 to +125
-40 to +85
(in °C)
DD
dsPIC30FXXX-30I
) of
DD
(1)
30
—
dsPIC30FXXX-20I
Max MIPS
dsPIC30F6010
20
—
dsPIC30FXXX-20E
DS80195H-page 11
20
—