PIC32MX440F512H-80I/PT Microchip Technology, PIC32MX440F512H-80I/PT Datasheet - Page 6

• Manufacturer Part Number: PIC32MX440F512H-80I/PT
• Description: IC PIC MCU FLASH 512K 64-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX440F512H-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 64-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX4xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 51
• Number Of Timers: 5 x 16 bit, 1 x 32 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320003, DM320002, MA320002
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 51
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 5
• Embedded Interface Type: EUART, I2C, PSP, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC244003 - TEST BD MPLAB REAL ICE LOOPBACKDM320003 - BOARD DEMO USB PIC32 OTGAC244006 - KIT MPLAB REAL ICE TRACEAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC32MX3XX/4XX
Silicon Errata Issues
1. Module: Device Reset
2. Module: Device Reset
3. Module: Device Reset
DS80440D-page 6
Note:
A Reset (MCLR) Pulse that is shorter than
2 SYSCLK will not reset the device properly.
Work around
Ensure that the device is held in Reset for more
than 2 SYSCLK to ensure proper device Reset
operation.
Affected Silicon Revisions
All Resets, except Power-on Reset, can cause a
Fail-Safe Clock Monitor event (if enabled) when
the duration of the Reset pulse exceeds the clock
period of the internal fail-safe clock reference clock
(31 kHz).
Work around
If long Reset pulses are anticipated, ignore or
disable Fail-Safe Clock Monitor events.
Affected Silicon Revisions
Attempting to perform a software device Reset
with PBDIV set to 1:1, and SYSCLK less than
1 MHz will not reset the device properly.
Work arounds
Work around 1:
Change PBDIV before performing a software
Reset.
Work around 2:
Set SYSCLK to a value that is greater than 1 MHz.
Affected Silicon Revisions
B2
B2
B2
X
X
X
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated by the shaded column in
the following tables apply to the current
silicon revision (B6).
B3
B3
B3
X
X
X
B4
B4
B4
X
X
X
B6
B6
B6
X
X
X
4. Module: External Voltage Regulator
5. Module: ADC
6. Module: Bus Matrix
A V
CPU to reset when using an external core voltage
supply.
Work arounds
Work around 1:
Use the internal voltage regulator.
Work around 2:
Use an external 1.8V regulator, which has a
regulation specification of ≤ 2.5%. The Microchip
TC1055-1.8VCT713
regulator, or an equivalent, is recommended.
Affected Silicon Revisions
When running the Analog-to-Digital Converter
(ADC) module in Internal Reference mode, the
gain error is 3-4 LSb and the offset error is 1-2 LSb
across voltage and speed.
Work around
Use in-system calibration and software techniques
to compensate for these errors.
Affected Silicon Revisions
The BMXDUDBA, BMXDUPBA and BMXPUPBA
registers can be set to values that are outside the
device’s actual memory size limit.
Work around
Do not write values greater than the specified
memory size of the device to the Bus Matrix
registers. Ensure that the upper bits of the
registers remain clear (‘0’).
Affected Silicon Revisions
B2
B2
B2
X
X
X
DDCORE
B3
B3
B3
X
X
X
voltage less than 1.75V will cause the
B4
B4
B4
X
X
X
© 2010 Microchip Technology Inc.
B6
B6
B6
X
X
X
Low
Drop-Out
(LDO)