C2012X7R2A104K TDK Corporation, C2012X7R2A104K Datasheet - Page 20

• Manufacturer Part Number: C2012X7R2A104K
• Description: CAP CER .10UF 100V X7R 10% 0805
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C2012X7R2A104K

• Capacitance: 0.1µF
• Package / Case: 0805 (2012 Metric)
• Voltage - Rated: 100V
• Tolerance: ±10%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESR
• Applications: General Purpose
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Thickness: 1.25mm
• Tolerance (+ Or -): 10%
• Voltage: 100VDC
• Temp Coeff (dielectric): X7R
• Operating Temp Range: -55C to 125C
• Mounting Style: Surface Mount
• Construction: SMT Chip
• Case Style: Ceramic Chip
• Failure Rate: Not Required
• Wire Form: Not Required
• Product Length (mm): 2mm
• Product Depth (mm): 1.25mm
• Product Height (mm): 1.25mm
• Product Diameter (mm): Not Requiredmm
• Dielectric Characteristic: X7R
• Capacitance Tolerance: ± 10%
• Voltage Rating: 100VDC
• Capacitor Case Style: 0805
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 445-1418-2; C2012X7R2A104KT

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — Mid Voltage Application // Version A11
No.
12
13
General
Specifications
Item
Resistance to solder heat
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Voltage
Proof
Vibration
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Performance
No cracks are allowed and terminations
shall be covered at least 60% with new
solder
1,000 min.
Meet the initial spec.
Meet the initial spec.
No insulation breakdown or other
damage.
No mechanical damage.
1,000 min.
Meet the initial spec.
Characteristics
Class 1
Class 2
Characteristics
Class 1
Class 2
C0G
C0G
X7R
X7S
X7R
X7S
X7T
X7T
Change from the
value before test
±2.5 %
± 7.5 %
Change from the
value before test
±2.5 %
± 7.5 %
C Series — Mid Voltage Application
Test or Inspection Method
Completely soak both terminations in solder at
260±5ºC for 5±1s.
Preheating condition
Flux: Isopropyl alcohol (JIS K 8839)
Solder: H63A (JIS Z 3282)
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Reflow solder the capacitor on a P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Vibrate the capacitor with amplitude of1.5mm P-P
sweeping the frequencies from 10Hz to 55Hz and back
to 10Hz in about 1min.
Repeat this for 2h each in 3 perpendicular directions.
Temp. : 150±10ºC
Time : 1 to 2min.
Rosin (JIS K 5902) 25% solid solution.