3443-96 3M, 3443-96 Datasheet - Page 5

• Manufacturer Part Number: 3443-96
• Description: LOCATOR PLATE PLUG
• Manufacturer: 3M

Specifications of 3443-96

• Features: Optional strain relief and pull tab
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 0-00-54007-35784-1; 00054007357841; 05400735784; 3443-96; 344396; 3M9432; 5400735784; 54007357841; 80-6101-7285-2; 80-610172852; 80610172852

78-9100-5422-6-B
4.3
4.4
4.5
4.6
5.0
Optional accessories available for the 3M
5.1
5.2
Place the cable/cover sub-assembly between the
guides on the locator plate, cover side sown.
(Figure 7).
Position and orient connector body, contacts
down, over the cable/cover sub–assembly,
aligning cover with the body slots. (Figure 7).
Lower the PRESS HANDLE firmly to complete
the Cable/Connector Assembly. (Figure 8)
Raise the press handle and remove completed
assembly. Visually inspect to ensure that :
a. Cover is fully seated and parallel with the
b. Cable is properly aligned with cover grooves.
c. Cover retaining devices on the body are flush
Procedures for Accessory Assembly
Strain Relief:
a. Bend cable back over the cover.
b. Engage one end of the strain relief onto the
c. Snap the other end of the strain relief into
Pull Tab
a. Slide the pull tab between the strain relief and
body.
with the cover end.
cover retaining device.
posistion. (Figure 9)
the cable. Seal both ends together. (Figure 10)
™
Locator Plate 3443-96 include: Strain Relief, Pull Tab and Polarizing Key.
5
Figure 10
Figure 7
Figure 8
Figure 9