140-0000-953 Emerson Network Power, 140-0000-953 Datasheet - Page 248
140-0000-953
Manufacturer Part Number
140-0000-953
Description
DIE SET MMCX/MCX
Manufacturer
Emerson Network Power
Type
Crimp Die Assemblyr
Specifications of 140-0000-953
Connector Type
MMCX, MCX
Crimp Handle
J572-ND
Crimp Or Cable Size
0.047" dia. flex cable, RG/U-178, 316, 316DS
Features
For Hand Crimp Tool
Cable Type
Flexible Cable
Connector Series
140 Series
Tool Type
Hand Crimp
Width
0.25 in.
Product
Tool Component
Description/function
Die for 0.047 in diameter flexible cable
For Use With
J572 - ACC FRAME FOR HAND CRIMP TOOL
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
1400000953
J604
J604
248
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
BNC Straight Crimp Type Plugs
for Flexible Cable
Connectivity Solutions
Tel: 800-247-8256
CPMC-88-21
PART NO.
•
RG-58, RG-59 PLENUM .235 (5.97), .250 (6.35)
Fax: 507-833-6287
CABLE
1. Identify connector parts. (3 piece parts)
2. Trim the cable to the dimensions shown. Take care not to
3. Slide the crimp sleeve onto the cable, narrow end first.
4. Slide the body over the contact and under the braid. Then
5. Arrange the braid uniformly around the crimp stem of the
nick the center conductor or the braid.
Solder the contact to the center conductor using the mini-
mum amount necessary for a good joint, make sure that
the contact is flush with the insulation of the cable. Flare
the braid.
seat the body firmly onto the contact.
body. Slide the crimp sleeve forward and crimp using the
recommended crimp hex.
•
www.EmersonNetworkPower.com/connectivity
SLEEVE HEX
CRIMP
STRAIN RELIEF
CRIMP HEX
.210 (5.33)
24-8857P/24-9859P
RECOMMENDED
CRIMP TOOL