140-0000-953 Emerson Network Power, 140-0000-953 Datasheet - Page 236

• Manufacturer Part Number: 140-0000-953
• Description: DIE SET MMCX/MCX
• Manufacturer: Emerson Network Power
• Type: Crimp Die Assemblyr

Specifications of 140-0000-953

• Connector Type: MMCX, MCX
• Crimp Handle: J572-ND
• Crimp Or Cable Size: 0.047" dia. flex cable, RG/U-178, 316, 316DS
• Features: For Hand Crimp Tool
• Cable Type: Flexible Cable
• Connector Series: 140 Series
• Tool Type: Hand Crimp
• Width: 0.25 in.
• Product: Tool Component
• Description/function: Die for 0.047 in diameter flexible cable
• For Use With: J572 - ACC FRAME FOR HAND CRIMP TOOL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 1400000953; J604

236
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMB 3-Piece
Straight Plugs
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
1. Identify connector parts. (3 piece parts): Crimp sleeve,
2. Strip cable to dimensions shown. Do not nick braid or
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over contact and
RG-316/U, 161, 174,
179, 187, 188
RG-316 DS, 188 DS,
RG-58/U, 141, 303
RG-179/U, 187
RG-179 DS, 187 DS
Belden 735A
body assembly and contact
center conductor. Tin center conductor if contact will be
solder attached. Do not tin center conductor if contact is
to be crimp attached. Slide heat shrink (as applicable)
and crimp sleeve onto jacket of cable.
Solder Attachment: Solder contact to center conductor
through solder hole using .015 (0.38) diameter solder.
Use a minimum amount of solder for a good joint.
Crimp Attachment: A miniature 8 indent crimp tool
140-0000-970 is recommended. Crimp location should
be centered between end of contact and X-hole using
positioner 140-0000-971. Crimp attachment to solid center
conductor cables is not recommended.
under braid. Then seat body assembly firmly onto contact.
The cable may have to be held in a clamping fixture.
Arrange braid uniformly around crimp stem. Slide crimp
sleeve forward and crimp using recommended crimp tool.
Slide heat shrink forward and shrink (as applicable).
CABLE GROUP
179 DS
•
www.EmersonNetworkPower.com/connectivity
131-3403-021/026
131-3404-021/026
131-3407-011/016
131-8433-001/006
131-8434-001/006
131-8445-011/016
PART NO.
CRIMP HEX
.151 (3.83)
.213 (5.41)
.128 (3.25)
.151 (3.83)
.178 (4.52)
.128 (3.25)