47821 Tyco Electronics, 47821 Datasheet - Page 5

• Manufacturer Part Number: 47821
• Description: DIE TERMINYL 69051 6AWG
• Manufacturer: Tyco Electronics

Specifications of 47821

• Lead Free Status / RoHS Status: Not applicable / Not applicable

Crimping Dies 47820 through 47825, 47915, and 47918
NOTE
9. To crimp the other half of butt splice, reposition
uncrimped end of splice in the stationary die and
follow the same procedure used to crimp the first
half of splice.
H
i
If butt splice sticks in die after crimping, apply a
rocking action to the butt splice to remove it from
the die. Wipe light oil on dies to reduce sticking,
or use spray dry lubricant.
ACCEPT
Figure 8
5. CRIMP INSPECTION
Inspect crimped terminals and splices by checking the
features described in Figure 8. Use only the terminals
and splices that meet the conditions shown in the
“ACCEPT” column.
NOTE
10. Inspect the crimp according to Section 5.
i
REJECT
Be sure to re-assemble locator onto stationary
die after crimping PLASTI-GRIP butt splices.
408-1729
5