H3CA-A Omron, H3CA-A Datasheet - Page 9

• Manufacturer Part Number: H3CA-A
• Description: RELAY TIMER SSR SPDT 24V
• Manufacturer: Omron
• Series: H3CAr

Specifications of H3CA-A

• Relay Type: Integrated
• Function: Programmable (Multi-Function)
• Circuit: SPDT (1 Form C)
• Delay Time: 0.1 Sec ~ 9990 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 3A @ 250VAC
• Voltage - Supply: 24 ~ 240VAC, 12 ~ 240VDC
• Mounting Type: Socket
• Termination Style: 11 Pin Socketable
• Timing Adjustment Method: Thumbwheel Switches
• Timing Initiate Method: Input Voltage
• Timing Range: 0.1 s to 9990 Hrs
• Supply Voltage: 24 V to 240 V
• Accuracy: +/- 0.3 %, - 0.05 s
• Current Rating (max): 3 A
• Display Type: LED Backlight
• Operating Temperature Range: - 10 C to + 55 C
• Output Current: 3A
• Supply Voltage Max: 240VAC
• Time Range Max: 9990h
• Switch Function: SPDT
• Time Range Min: 0.1s
• No. Of Digits / Alpha: 3
• Supply Voltage Min: 24VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: H3CA-A; H3CAA; Z2359

Mounting Track (Meets DIN EN50022)
Protective Cover
PFP-100N/PFP-50N
Note: This dimension applied to PFP-50N.
PFP-M
Y92F-30
Y92A-48B/Y92A-48D
End Plate
Note: Pay attention to the orientation of the adapter when mounting
The protective cover protects the front panel, particularly the
time setting section, against dust, dirt and water drip, as well
as prevents the set value from being altered due to accidental
contact with the time setting knob.
Adapter for Flush Mounting
two or more timers in a vertical or horizontal line.
Y92A-48B
Hard Plastic Cover
(see note)
Y92A-48D
Soft PVC Cover
Note: The Y92A-48B Protective Cover is made of a hard plastic and
PFP-100N2
PFP-S
Note: A total of 12-25 × 4.5 elliptic holes are provided with 6 holes
therefore, must be removed to change the timer set value. However,
since the Y92A-48D Protective Cover is made of PVC, the set value
can be altered by pressing on the surface of the cover.
It may be, however, difficult to make setting changes of the Timer
with the Y92A-48B Protective Cover attached, which must be taken
into consideration before using the Y92A-48B Protective Cover.
When attaching the Y92A-48A to the Timer to be panel-mounted,
use the Y92F-30 Mounting Adapter along with the Timer.
The Protective Cover cannot be, however, used for the H3CA-FA
Series.
cut from each rail end at a pitch of 10 mm between holes.
Twelve, 25 × 4.5 elliptic holes (see note)
H3CA
9