G6L-1P-DC24 Omron, G6L-1P-DC24 Datasheet - Page 7

• Manufacturer Part Number: G6L-1P-DC24
• Description: RELAY TELCOM SPST 24V PCB
• Manufacturer: Omron
• Series: G6Lr

Specifications of G6L-1P-DC24

• Coil Type: Standard
• Coil Current: 9.6mA
• Relay Type: Telecom
• Circuit: SPST-NO (1 Form A)
• Contact Rating @ Voltage: 1A @ 24VDC
• Coil Voltage: 24VDC
• Control On Voltage (max): 18 VDC
• Control Off Voltage (min): 2.4 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Form: 1 Form C
• Power Consumption: 230 mW
• Contact Rating: 0.3 A at 125 VAC, 1 A at 24 VDC
• Contact Configuration: SPST-NO
• Contact Current Max: 1A
• Contact Voltage Ac Nom: 125V
• Contact Voltage Dc Nom: 24V
• Coil Voltage Vdc Nom: 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: G6L1PDC24; Z2041

G6L
Recommended Soldering Method
Temperature Profile According to IRS
• When performing reflow-soldering, check the profile on an actual
Mounting Solder: Lead
Mounting Solder: Lead-free
I
UL approval: UL60950 (File No. E41515)
CSA approval: C22.2 No.60950 (File No. LR31928)
Measuring
position
Terminal
Upper surface
of case
Measuring
position
Terminal
Upper surface
of case
SPST-NO
device after setting the temperature condition so that the
temperatures at the relay terminals and the upper surface of the
case do not exceed the limits specified in the following table.
Approved Standards
Contact form
Item
Item
T4
T3
T2
T1
150 ° C to 180 ° C,
120 s max.
---
150 ° C to 180 ° C,
120 s max.
---
(T1 to T2, t
(T1 to T2, t
Preheating
Preheating
G6L-1P and G6L-1F: 3 to 24 VDC 1A at 30 VDC
1
1
)
)
Preheating
180 ° C to 200 ° C,
20 to 30 s
---
230 ° C min.,
30 s max.
---
Soldering
Soldering
t
1
Coil rating
(T3, t
(T3, t
2
2
)
)
Soldering
t
2
Time (s)
245 ° C max.
250 ° C max.
250 ° C max.
255 ° C max.
Peak value
Peak value
(T4)
(T4)
0.5A at 60 VDC
0.3A at 125 VAC
Contact rating
• The thickness of cream solder to be applied should be within a
Visually check that the Relay is properly soldered.
PCB
range between 150 and 200 µ m on OMRON's recommended
PCB pattern.
Correct Soldering
Terminal
Relay
Solder
Number of test operations
6,000
Land
Incorrect Soldering
Insufficient
amount of
solder
Excessive
amount of
solder
G6L
55