CHIPPROG-40 Phyton Inc, CHIPPROG-40 Datasheet - Page 65

• Manufacturer Part Number: CHIPPROG-40
• Description: PROGRAMMER STANDALONE 40-DIP
• Manufacturer: Phyton Inc
• Type: Universal, Stand Aloner

Specifications of CHIPPROG-40

• Contents: Programmer, Cables, CD, Power Adapter
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• Features: Embedded Script Language For Automation Of Routine Operations, Splits Files To Multiple Images
• Rohs Compliant: Yes
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

© 2010 Phyton, Inc. Microsystems and Development Tools
4.4.1.2.1 Split data
Reverse bytes order
Blank check before
program
Verify after program
Verify after read
Auto-Detect presence of
device in the socket
On Device Auto-Detect or
'Start' Button:
Radio button
No split
Even byte
Odd byte
The group of radio buttons in the
devices to be used in the microprocessor systems with the 16- and 32-bit address and data buses. To
do so the buffer content should be properly prepared to split one memory file iinto several smaller files.
The data splitting enable the conversion of the data read from 16- or 32-bit devices to make file images
for writing them to memory devices with the byte organization.
If this box is checked the will sweep the byte order in the 16-bit
word while it executes the Read, Program and Verify operations.
This option does not affect the data in the ChipProg buffers, as
they remain the same after the file loading.
If this box is checked the ChipProgUSB will test whether each of
the device leads is reliably squeezed by the programming socket
contact. If so a preset programming function (operation) or
Programming
operation will be blocked.
The group of radio buttons. The checked radio button defines what
the ChipProg
Description
If this box is checked the ChipProgUSB will always check if the
target device is blank before programming it.
If this box is checked the ChipProgUSB will always verify the device
content right after it was programmed.
If this box is checked the ChipProgUSB will always verify the device
content right after it was read out.
This is a default option. A whole buffer is not split and is considered
as a whole one byte data array.
The data in the buffer are considered as an array of 16-bit words.
The buffer-device operations are conducted with even bytes only.
For example, if the programmer reads the device from the
address=0, the byte with this address will be placed to the buffer
location also with the address=0, the byte from the device with the
address=1 will be placed to the buffer location with the address=2,
etc.
The data in the buffer are considered as an array of 16-bit words.
The buffer-device operations are conducted with odd bytes only.
For example, if the programmer reads the device from the
Option
tab in the
'Start'
will start. Otherwise, if some contact is bad a current
button.
Split data
field allows programming 8-bit memory
Graphical User Interface
Auto
65