SUPERPRO 500P Xeltek, SUPERPRO 500P Datasheet - Page 82

• Manufacturer Part Number: SUPERPRO 500P
• Description: PROGRAMMER UNIVERSAL 48-PIN
• Manufacturer: Xeltek
• Series: SuperPro 500Pr
• Type: Universal, Stand Aloner

Specifications of SUPERPRO 500P

• Contents: Programmer with 48-Pin DIP Socket, AC Adapter, Software CD, USB Cable, Users Manual
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• No. Of Devices Supported: 22462
• Kit Contents: SuperPro 500P Programmer, AC Adapter, CD
• Rohs Compliant: Yes
• For Use With/related Products: E/EPROM, FLASH, PLD, Micros and more listed on Device Sheet, 21,000+ Devices Supported
• For Use With: 415-1029 - SOCKET ADAPTER FOR SDIP42415-1028 - SOCKET ADAPTER FOR TQFP32415-1027 - SOCKET ADAPTER FOR TSOP56415-1025 - SOCKET ADAPTER FOR SOIC20415-1024 - SOCKET ADAPTER FOR TSOP40415-1023 - SOCKET ADAPTER FOR SOP44415-1022 - SOCKET ADAPTER FOR TSOP56415-1019 - SOCKET ADAPTER FOR SOIC16/SOIC8415-1018 - SOCKET ADAPTER FOR SOIC28415-1015 - SOCKET ADAPTER FOR PLCC28415-1014 - SOCKET ADAPTER FOR PLCC20415-1013 - SOCKET ADAPTER FOR PLCC32415-1017 - SOCKET ADAPTER FOR PLCC44
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Other names: 415-1047; SP500P

Program Two or More Files to One Chip
You can load several files into the buffer and write them to the chip. The following
explanation gives an example of programming three files (Sample1, Sample2, and
Sample3) to one chip. The example assumes the following:



Superpro
2. Based on the byte (8‐bit), divide the file into four parts by address of the first
3. Based on the word (16‐bit), divide the file into two parts by address of the first
1. Select Edit from the Buffer menu. Make sure that the Buffer clear on data load
2. Select Load from the File menu to load the Sample1 file.
Program the two parts into two chips respectively.
When loading the file, select Even as the File Mode to write the data in the
addresses 0,2,4,6, etc. to one chip. Select Odd as the File mode to write the data
at the address 1,3,5,7, etc. to the other chip.
byte, the second byte, the third byte and the fourth byte out of every four bytes.
Program the four parts to four chips respectively.
When loading the file, select the 1
in the addresses 0, 4, 8, 12 (or C if HEX), etc. to one chip. Then select 2
of 4, 3
other three chips.
two bytes and the last two bytes out of every four bytes. Program the two parts
to two chips respectively.
When loading the file, select the 1
the data in the addresses 0, 1, 5, 6, etc. to one chip. Then select 2
to write the remaining data to the other chip.
Write the data from the address 200 (Hex) of the file Sample1 to the address 0
of the chip. 
Write the data from the address 0 (Hex) of the file Sample2 to the address 3000
(Hex) of the chip. 
Write the data from the address 4000 (Hex) of the file Sample3 to the address
4000 (Hex) of the chip. 
option is not checked.
In the Buffer Address field, enter 0. 
In the File Address field, enter 200. 
®
rd
5000 User’s Guide
byte of 4, and finally 4
th
st
st
byte of 4 to write the remaining data to the
2_type of 4 as the File Mode to write
byte of 4 as the File Mode to write the data
nd
_byte of 4
nd
byte
82