HS2168KCM01H Renesas Electronics America, HS2168KCM01H Datasheet - Page 11

• Manufacturer Part Number: HS2168KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS2168KCM01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3. #RES of pin 4 of the Hitachi-UDI port connector is a signal line in which the
4. The FWE pin must be pulled up if the emulator is connected to the user system.
5. Ground pins 8 to 10, and 12 to 14 of the Hitachi-UDI port connector.
6. Pin 11 of the Hitachi-UDI port connector must be connected to the user system
emulator outputs signals to the MCU. An AND operation must be performed
between #RES (pin 7) and the user system reset circuit for the signal line
connected to the MCU.
#RES of pin 7 of the Hitachi-UDI port connector is a signal line in which the
emulator monitors the #RES signal of the MCU.
The #RES must be pulled up before it is connected to pin 7 of the Hitachi-UDI
port connector.
Vcc (power supply). The amount of voltage permitted to input to the Hitachi-
UDI port connector must be within the guaranteed range of the microcomputer.
Figure 4.4 Examples of Reset Circuits
Figure 4.5 Connection of FWE Pin
8