RTA-FOUSB-MON Renesas Electronics America, RTA-FOUSB-MON Datasheet - Page 6

• Manufacturer Part Number: RTA-FOUSB-MON
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: FLASHr

Specifications of RTA-FOUSB-MON

• Contents: USB Compact Flash Programmer, USB Cable, CD-ROM and User Manual
• For Use With/related Products: M16C Family and 740 Family
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4. Running KD30 Debugger
Before running the debugger, connect the target board to the ICD using the 10-pin flat ribbon cable.
Connect the ICD to your PC using the supplied USB cable. If you are using a Renesas SKP starter kit
(e.g.: SKP16C62P) the ICD should be set to Bus Powered (S1 set to USB) mode. If using any other
target board, select Target Powered mode and supply power through the target board itself.
To run the KD30 debugger, double click on the kd30.exe shortcut on your desktop. An init window, similar
to one shown below, will be displayed.
Select ‘USB’ option and click on ‘OK’ button. The KD30 screen should appear. Please see the KD30 Help
on how to use the debugger (Start > Programs > Renesas-Tools > KD30 V.3.20 Release 1B >KD30
Help).
KD30 supports at least 2 breakpoint settings on all M16C Family MCU’s. Table 4.1 lists the MCU’s with
additional breakpoint capability as well as those with DBC interrupt support. DBC interrupts are discussed
in more detail in Section 8.
Table 4.1 M16C MCU Support Summary
To close KD30, click on ‘File’ menu and select ‘Exit’; or, click on the close button on the upper right corner
of the Window. Do not unplug or detach the ICD from your PC without closing KD30 first. Detaching the
ICD while KD30 is still up may cause problems when you try to use KD30 again.
RTA-FOUSB-MON User’s Manual Rev 2.2
M16C MCU
M16C/26, M16C/28, M16C/29
M16C/62P, M16C/6N4, M16C/6N5
M32C/83
M32C/85
Fig. 4.1 KD30 Debugger Initialization Screen
DBC Support
5 / 27
Yes
Yes
Yes
Yes
Breakpoints
6
8
4
8
Applications Engineering
Jan 2005